Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

The strange nature of this problem is what is stumping me. I built my computer about 7 months ago using all new parts off of Newegg (not a kit or anything).

One day, I wake up and turn on my computer. I press the power button and it turns on, but then back off after half a second.

I press the power button again, this time nothing. I continue pressing the power button while at the same time turning the power supply on and off (to try and reset things). The power button still does nothing.

But then, after about 5 minutes - voilà! It works just fine like nothing was ever wrong.

It goes for an entire week working just fine. Then, one morning, the entire process starts again. I press the power button and it comes on and then right back off. I press the power button several times and nothing happens, and then it works again after a couple minutes of trying.

What is going on with my computer?

share|improve this question
    
I regret I had very similar symptoms with an HP G61. A repair shop reported they had a warehouse full of that model with the same problem and did not know how to fix it. Turned out to be on board voltage regulation failure - and terminal, though my PC was barely 18 months old. –  pnuts Dec 12 '12 at 22:06
    
So it was a faulty motherboard? Did they ever find a solution? –  hellohellosharp Dec 12 '12 at 22:08
    
Yes. No. My solution was to buy an Acer (my repair man said he never got to see many of those!) - and never any HP product ever again (since I had a Pavilion before (cost ~£5k) that had an acknowledged manufacturing defect (graphics card overheated)). –  pnuts Dec 12 '12 at 22:15
    
Did your problem happen all at once or just once a week-ish like mine? –  hellohellosharp Dec 12 '12 at 22:22
    
hahahaha i like your spelling of Voila better hahaha –  im so confused Dec 12 '12 at 22:27
show 2 more comments

3 Answers

up vote 2 down vote accepted

You also didn't say whether or not the computer was custom built with all new parts or, perhaps, some were scavenged from other computers.

Try the following -

  • double-check that all of your wires are connected properly (including the wires leading to the switch)
  • check to make sure that you don't have an accumulation of dust or other debris (carefully blow it out with a can of compressed air if you)
  • check the power supply by transferring it to another computer that is known to be working
  • install a new power supply appropriate for the other components

This isn't an exhaustive list; just things I've encountered over the years building my own systems.

If nothing suggested here works, take it to a local computer repair shop.

(Edited to reflect updates to the question.)

share|improve this answer
1  
read the question again... It was clearly edited to say he built it himself –  MalwareManiac Dec 12 '12 at 22:00
    
When I started typing, it didn't. –  Mike Chess Dec 12 '12 at 22:03
    
I know Im letting you know that he edited it –  MalwareManiac Dec 12 '12 at 22:04
    
Thanks for giving me a simple checklist of things to try. The next time it happens (and it will), I will try some of these things. The rarity of the issue makes it difficult to troubleshoot though.... –  hellohellosharp Dec 12 '12 at 22:06
1  
@hellohellosharp The term is "intermittent" –  barlop Dec 29 '12 at 1:19
add comment

Try changing the power supply.

Try changing components. Power supply. That power supply in another machine. Another power supply in your machine.

It's going to be either your power supply is bad or not plugged in right, or your motherboard is bad. So if you prove it's not the power supply, then process of elimination, it's the motherboard. But i'd think it's the power supply if anything. I am not sure how a bad motherboard could behave like that though maybe it could. You'd see if you bothered to do some troubleshooting.

share|improve this answer
5  
while your probaly right on with your answer there is no need to be rude just because this person knows less about computers and troubleshooting then you do –  MalwareManiac Dec 12 '12 at 21:44
    
I DID build the computer actually, sorry I guess the term "Custom-built" is slightly misleading. I have access to the interior. I tried switching some things around but nothing seemed to show the problem. I wasn't sure if my power supply was stable so I did not want to touch the wrong thing. –  hellohellosharp Dec 12 '12 at 21:51
3  
@barlop edited your answer to remove the rudeness and it would be appreciated if you would do the same to your comments –  MalwareManiac Dec 12 '12 at 22:01
2  
I'm all for constructive criticism, but this answer was just presumptive and mean. (It does sound like an electrical problem to me, so I haven't downvoted this, but you need to stow the attitude.) –  Shinrai Dec 12 '12 at 22:05
1  
@barlop no offense not trying to be a jerk... just saying it was unecessary. –  MalwareManiac Dec 12 '12 at 22:15
show 10 more comments

One other possibility are checking the bios parameters carefully.

Have you discussed the problem with the person that built your computer?

share|improve this answer
    
Sorry, I shouldn't have said Custom Built. I did build the computer myself. –  hellohellosharp Dec 12 '12 at 21:52
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.