Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have a basic lab environment set up to try and get 2 vLANs working in hyper-v.

I have the following equipment

  • 1 hyper-v server
  • 1 Desktop PC
  • 1 Managed Switch (d-link DES-3052P)
  • 1 cheap router (DI-604)

My end goal is to have 1 VM and the desktop on one vLAN with internet, and 1 VM on a separate vLAN with internet access.

I am having troubles getting an internet connection to both vLANs. The switch does not have the ability to have asynchronous vLANs.

This is my switch configuration

  • Port 1 - Trunk Port - Connected to router
  • Port 2 - Trunk Port - Connected to hyper-v Server
  • Port 3 - Access Port- Connected to Desktop

Within hyper-v I have 1 switch and 2 VMs. When the VMs are set up to use vlan ID 1, everything works fine. As soon as a VM is set up to use vlan ID 2, they lose all network connection and cannot communicate with the router anymore. I believe this is because the router is not vLAN aware.

Can anyone help me with what settings need to be set up on my switch? I believe I want an egress rule so traffic leaving towards the router is untagged, is that right? If not, any ideas or hints as to what needs to be set up?

share|improve this question
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.