Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have an older computer with a SATA-I connection. My hard drive crashed and I need to buy a new hard drive. Will I run into problems if I connect a SATA-II drive to my computer?

share|improve this question

1 Answer 1

up vote 7 down vote accepted

Yes, SATA-II is backwards-compatible. You'll only be able to use SATA-I bandwidth (150 MB/s), but since that is well above what normal hard drives deliver, that shouldn't be a problem.

share|improve this answer
    
that's what i thought too, but i've got recent Seagate SATA-II drives that aren't playing nice with my onboard SATA-I controller. no jumpers to force it either. could be a bios config issue, i gave up and put them on an internal sataII controller. –  quack quixote Oct 7 '09 at 1:37
    
I finally got everything connected up about a week ago and it worked like a champ, no problems. –  Michael Keeling Nov 15 '09 at 19:08
    
I'm not so sure about the "(150 MB/s) is well above what normal hard drives deliver", actually. I just checked the throughput on my most recent ZFS scrub (which is pretty a random-I/O intensive operation) on the large single-disk spinning-platter pool, and that shows ~124 MB/s in verification data throughput. (1.47TB verified as correct on disk in 3 hours 27 minutes.) If that disk was using SATA-I, that wouldn't leave much margin for lower-level stuff, let alone that ZFS scrubbing is an online operation. This doesn't invalidate the answer, though. –  Michael Kjörling Dec 14 '13 at 11:46

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.