Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

My monitor will not display any signal from my PC all of the sudden. I have verified that it is not the monitor or the video card (the monitor works on another computer, and I have tried multiple video cards). My motherboard does not have a video output, so all I have is 2 DVIs from the video card to try. When the computer boots up everything sounds normal and if i unplug and plug in the DVI while it is running the monitor will briefly act like it is coming on and then change to "digital power save" as if it doesn't get a working signal.

I have:

  • made sure the monitor is on the correct source
  • checked and rechecked all cables and plugs
  • tried power cycling and resetting everything.
share|improve this question
    
cable? or is there anything in bios? maybe reset bios to default... –  Logman Dec 25 '12 at 4:25
    
How do you know it's not the video card? Did you try it in other computers? or did you try multiple cards in this computer? –  ChrisN Dec 25 '12 at 4:33
    
As I said, I have tried multiple video cards in this computer –  jimdrang Dec 25 '12 at 4:42

1 Answer 1

Does 'resetting everything' include shorting/resetting the cmos, jumper? A bad setting, or IRQ conflict could do this. I'd perhaps yank SATA cables out and pull any other cards and then reset the CMOS and see if you can get display.

share|improve this answer
    
I did reset CMOS, but not with all the cables yanked yet –  jimdrang Dec 25 '12 at 4:43

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.