I think I had a bad idea this night.
I flashed ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2013/01-01-2013-r20453/tplink_tl-wa901ndv2/factory-to-ddwrt.bin into a brand new tplink-wa901nd v2, and now it doesn't look very good. The power led is on, and also on is the LAN led when I attach the cable to my computer but the WLAN and SYSTEM are now always off.
When I attach the cable to my computer, I cannot access
I haven't much experience on bricks, but this looks like one.
doing a netscan on my network I see:
network router Router 192.168.1.1 MAC-ADDRESS network router Router 22.214.171.124 MAC-ADDRESS unidentified device hidden 126.96.36.199 MAC-ADDRESS
I tried to telnet and ssh
192.168.1.1 with no luck.
I tried to do the 30/30/30 reset, and nothing changed.
I tried the tftp transfer using the original firmware from tp-link; this is the output:
tftp> connect 192.168.1.1 tftp> binary tftp> rexmt 1 tftp> timeout 60 tftp> put wa901nv2_en_3_12_16_up(120224).bin Transfer timed out.
basically, it's not answering to tftp (and timing out).
I tried also immediately after a reset, during boot time. no luck.