I recently (1 month ago) installed Windows 8 64 bit on my computer. I formatted my SSD completely, so as new again! I did not get any errors during the installation so I thought everything will be all right. Windows 8 works perfectly but only when I resume my computer from sleep after one minute I get a BSOD. I use BSOD Viewer from Nirsoft to view the errors who caused the BSOD. I did not get this error before I installed Windows 8. This is a link to one of the minidumps, here is a link of another minidump
I tried to install all my drivers again but it did not help anything. My computers specs:
Intel i7 920
Crucial M4 128GB SSD
Club3D HD4890 Superclocked Edition
A bunch of hard disks
sfc /scannow I opened the log file. The last view lines of the log:
2013-01-09 18:10:12, Info CSI 00000718 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction have been successfully repaired 2013-01-09 18:12:13, Info CBS Idle processing thread terminated normally 2013-01-09 18:12:13, Info CBS Trusted Installer is shutting down because: SHUTDOWN_REASON_AUTOSTOP 2013-01-09 18:12:13, Info CBS TiWorker signaled for shutdown, going to exit. 2013-01-09 18:12:13, Info CBS Ending the TrustedInstaller main loop. 2013-01-09 18:12:13, Info CBS Starting TrustedInstaller finalization. 2013-01-09 18:12:13, Info CBS Ending TrustedInstaller finalization. 2013-01-09 18:12:13, Info CBS Ending the TiWorker main loop. 2013-01-09 18:12:13, Info CBS Starting TiWorker finalization. 2013-01-09 18:12:13, Info CBS Ending TiWorker finalization.
Data from WhoCrashed 4.0.1:
On Thu 10-1-2013 14:58:02 GMT your computer crashed crash dump file: C:\Windows\Minidump\011013-32245-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x7B340) Bugcheck code: 0x9F (0x3, 0xFFFFFA80051F7060, 0xFFFFF80242C3EB30, 0xFFFFFA8012FD1C10) Error: DRIVER_POWER_STATE_FAILURE file path: C:\Windows\system32\ntoskrnl.exe product: Microsoft® Windows® Operating System company: Microsoft Corporation description: NT Kernel & System Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state. This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.