Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Is there anything that will natively allow read/write on an ext2/3 partition within Snowie?

Just don't want to get a Linux box to mount, and then access via samba. Although I could perhaps through VMware Fusion … and then share it back…

Anyway to do this natively?

share|improve this question
add comment

4 Answers

up vote 25 down vote accepted

I haven't tried it, but MacFUSE OSXFuse plus fuse-ext2 is supposed to work.

share|improve this answer
1  
MacFuse is no longer maintained –  olafure Mar 29 '12 at 12:44
1  
OSXFuse is a proper FUSE library, unlike MacFuse, and it is not only maintained, but it also provides a MacFUSE compatibility layer osxfuse.github.com –  Hans-Christoph Steiner Jan 15 '13 at 3:37
    
fuse-ext2 link is broken. You can find it here. –  Ninsuo May 22 '13 at 9:28
1  
Just for information: I've installed both OSXFuse and Fuse-Ext2 on Mavericks, and there's no need to use the Terminal to mount the Ext2 disk... it is automatically recognized and mounted –  Barranka Nov 8 '13 at 18:05
add comment

I find the easiest and most reliable way to access linux ext3 partitions on my mac is to run Ubuntu in a vmware virtual machine on the mac. Once running you can connect Ubuntu to the ext3 drive via usb, and this way you can get complete reliability reading and writing to ext3 file systems. It's fast because the disk is directly connected to the mac, unlike on a network. And you can use it to copy files very quickly to/from the mac host by using shared directories or any number of other ways.

share|improve this answer
    
That too might be an idea. Thanks. –  romant Jan 30 '10 at 1:34
add comment

fuse-ext2 works but is very slow (I get some 7 MB/s reading and 1 MB/s writing via USB 2.0).
If you have the choice, better use Apple's HFS+ on the external drive, which is much faster
(I get some 30 MB/s both reading and writing, both on Mac and Linux).

HFS+ is supported by Linux mostly out-of-the-box. To get write access even to a journaled partition on Ubuntu, install support via sudo apt-get install hfsprogs and when the drive is mounted (e.g., automatically), re-mount it writable using sudo mount -o remount,force,rw /mount/point

BTW, recently I suffered from a Mac OS crash apparently due to fuse-ext2
https://sourceforge.net/projects/fuse-ext2/forums/forum/787602/topic/6549364

share|improve this answer
1  
I've run dual-boot with a shared HFS+ partition for years. While the HFS+ option was fast, it was also not very reliable. If you want read/write access, you have to turn of the HFS+ journaling, and HFS+ will fully self-distruct from time to time without the journaling. –  Hans-Christoph Steiner Jan 15 '13 at 3:39
add comment

You could also install either e2fsprogs or ext2fuse with macports.


Don't think any mount commands are included with port's e2fsprogs. (Though there's fsck and the like.) But installing ext2fuse does do the trick!

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.