Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I recently built a new PC running Windows 7 on an SSD and am surprised to see my Primary Hard Disk - Disk Data Transfer Rate scoring at a 5.9.

My motherboard is a GIGABYTE GA-Z77X-UP4 TH and my SSD (which the OS is installed on) is a Samsung 840 Series 2.5 inch 120GB SATA III.

From everything I have looked at I should have a score in the 7.x range for this combination of hardware based on the fact that I am using the SAT III port for the SSD. I have used Samsungs software to make sure I am on the current firmware and am unsure as to what I need to look at from a BIOS perspective to determine if my configuration is optimal.

Any help would be appreciated, please let me know if there is additional detail necessary to identify the issue.

Edit - Here are the current scores coming out of Samsung SSD Magician . . . Seq Read: 526 MB/s Seq Write: 132 MB/s

Random Read: 82,449 IOPS Random Write: 32,925 IOPS

share|improve this question

closed as too localized by Shinrai, Dennis, Everett, 8088, Dave Jan 15 '13 at 9:27

This question is unlikely to help any future visitors; it is only relevant to a small geographic area, a specific moment in time, or an extraordinarily narrow situation that is not generally applicable to the worldwide audience of the internet. For help making this question more broadly applicable, visit the help center.If this question can be reworded to fit the rules in the help center, please edit the question.

3  
What is the SATA setting in the BIOS? Should be AHCI, but may be on legacy (IDE) or Raid. However, the WEI is relatively arbitrary. –  nerdwaller Jan 14 '13 at 22:35
    
WEI might be mistakenly consider a HDD your primary hard drive. Whatever the reason is, there is no problem to solve here. It doesn't matter how fast WEI thinks your SSD is. –  Dennis Jan 15 '13 at 2:42

1 Answer 1

up vote 0 down vote accepted

For WEI, it may be best to reset the results so that you system show as "Unrated" and then rerun the assesment. I agree with you that your primary HDD data transfer results should be nearing the max 7.9 mark with your equipment.

To reset WEI score at sevenforums.com has listed out an easy tutorial.

Other thoughts would be to ensure that you have enabled AHCI in BIOS and double check in widows. Should see this in your device manager AHCI You can follow one of a few suggestions here in SU like this one. Double check your SATA connections and that you are on the grey SATA ports on your board, never hurts to recheck the obvious

share|improve this answer
    
After reviewing my BIOS settings and version I ended up updating the BIOS and resetting the WEI score. I did not change any BIOS settings but the combination of BIOS update and recreating the WEI score resulted in a 7.9 score for the SSD. Thanks for your help. –  Matt O'Brien Jan 16 '13 at 17:24

Not the answer you're looking for? Browse other questions tagged or ask your own question.