Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I've been following the various guides online for migrating to an SSD but I just can't seem to get my partition to shrink to a small enough size. I've run every defrag option in defraggler multiple times, and I've run the Windows 7 defragmentation tool plenty of times too, but the Windows disk manager won't shrink my partition any smaller than 1277.8 GB. I only have 128 GB of data on this disk, so I'm not sure what the problem is.

Defraggler's graphical view of the disk blocks shows a long sequence contiguous block of used space, and then all empty space. Still, the disk management tool won't let me shrink the partition any further.

Any thoughts on what I might be missing?

share|improve this question

migrated from serverfault.com Jan 18 '13 at 19:59

This question came from our site for professional system and network administrators.

2  
I think you might have posted this to the wrong site by accident. –  MDMarra Jan 18 '13 at 19:56
add comment

3 Answers

You should use Microsoft's Imaging system imagex to capture an image, and apply that image to the new SSD. ImageX is a filesystem based imaging system, not a sector based imaging system. You'd boot to a winpe disk, capture the image to a USB drive or network share or external, or whatever, and apply the image. Again, since ImageX is a file systembased imaging sysytem and not a sector based imaging system you wont have to worry about the partition size or anything.

http://www.microsoft.com/en-us/download/details.aspx?id=5753

To copy: imagex /capture d: d:\imaging\data.wim "Drive D" /verify

To apply: imagex /apply d:\imaging\data.wim 1 /verify

share|improve this answer
    
I thought ImageX was the tool used by the system imager, which I already tried. It wouldn't restore to the SSD, and when I looked up the error I received online, the implication seemed that I still had to shrink the partition to fit within the SSD size. Is this not the case? –  naasking Jan 18 '13 at 20:39
    
clean the disk and create an active partition –  MDT Guy Jan 18 '13 at 20:44
    
I'll try the command-line version then, thanks. Do I need to reboot into the recovery console to copy and/or apply imagex? Edit: never mind, didn't realize it's an iso. –  naasking Jan 18 '13 at 21:04
    
Quite an ordeal still. Had to generate a Windows PE boot CD containing the imagex program, then generate the image from the original disk. I wrote the image to the SSD and fixed the booting issues (missing mbr, etc.), and now it boots, but the user desktops don't load. It just sits there on a blue background after successful login. Also, I had biometric software installed which showed certain icons on the login screen, and those are gone as well and biometrics doesn't work for login. Not sure what's going on now. Any thoughts? –  naasking Jan 19 '13 at 17:53
    
it's booting to the same PC? –  MDT Guy Jan 19 '13 at 18:40
show 6 more comments

Use another partitioning software, I recommend using Parted Magic

Burn the ISO file and boot from the CD.

share|improve this answer
add comment

On a couple of occasions I've defragged a disk and found there's 'unmovable' data, even when booting from a CD or USB. In almost every case these have been USN journal files.

Try booting from a BartPE disk and run mydefrag and see if you have small blocks showing red, if they are USNJrnl files, try deleteing them as detailed on the mydefrag website: http://www.mydefrag.com/VolumeActions-DeleteJournal.html

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.