Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

When I switch on the PC and system boots/starts with Windows XP Professional OS, I'm able to see the Windows XP logo and with progress bar processing But after the logo and processing I'm not getting the Welcome or Login screen immediately my PC is getting restarted automatically.

PC On -> Windows XP logo processing screen -> Auto Restarting the PC -> Windows Xp logo processing screen -> Automatically restart

What I tried:

  • With Windows XP bootable CD first I tried either Repair option then with Fresh installation also.
  • I'm unable to perform Repair or fresh installation of Windows XP Professional too. As soon as I select the Repair or Fresh installation option I'm getting the Blue screen as below.

I'm getting a blue screen with the following information.

Blue screen information:

"A problem has been detected and Windows has been shutdown to prevent Damage to your computer IRQL_NOT_LESS_OR_EQUAL
....
...
...
....
Disable BIOS Memory options such as Caching or Shadowing.
....
....
....

STOP: 0x0000000A (0xF000E987, 0x00000002, 0x00000001, 0x808247A4)"

I would request if anyone could help me with proper resolution and suitable solution other than Formatting/Clean installation option for the same.

As I tried with Safe mode, Safe mode with Command Prompt and multiple options but system is auto restarting. Nothing is worked out. My system configuration is:

Microsoft Windows XP Professional with Service Pack-3, 32 bit

share|improve this question

migrated from stackoverflow.com Jan 21 '13 at 16:47

This question came from our site for professional and enthusiast programmers.

    
Check your BIOS options do you have bios shadowing enabled? It's useless with an NT operating system, so you can disable it. –  Kyle Jan 21 '13 at 15:43
    
@Kyle: In BIOS, this option is disabled by default. hmm... :( –  sukumar Jan 21 '13 at 15:57
add comment

1 Answer

I get this when I have an unstable overclock. Sounds like the processor has gone bad. If you can get into windows for any length of time, run prime95 and see if it goes red. If it does, it'll confirm the processor isn't working properly.

To get over this during an OC, I either drop the bclk or up the vcore voltage. You can try this and see if it helps, but only do that if you know what you are doing because you can burn out your hardware very easily if you don't. I understand you aren't running an overclock but attacking the processor in the same manner may make the system stable.

Run memtest for 24 hours anyway. It won't hurt!

This BSOD can also be driver related, but as you are booting from disc and still getting it, I'd say it's likely the processor.

share|improve this answer
    
"I either drop the bclk or up the vcore voltage." -this is bad advice without knowing what processor he has. Newer processors may use an offset for voltage and newer Intels should not have their BLCK adjusted (use either the blck strap or the multiplier). –  Kyle Jan 21 '13 at 16:03
    
@Simkill, seems my processor, m/b is good. As u mentioned how to run memtest? Please guide me step by step hw to check/attack the processor? My processor is Intel Pentium4 –  sukumar Jan 22 '13 at 2:10
    
How to run Prime95 –  sukumar Jan 22 '13 at 2:12
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.