Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I use my USB flash (thumb) drive quite often to move data between several computers (Macs and PCs.) When I plug in this flash drive into Windows 7 it shows this message:

"Do you want to scan and fix ...?"

enter image description here

If I click "Scan and fix" the message goes away for a little while only to come back again.

Is there a setting in Windows to make this message go away because it is very annoying to click through this window every time I plug in my drive?

PS. I run this same flash drive on a Mac computer and it never tells me that there's an issue with the drive.

PS2. I have other flash drives that keep showing this same message on Windows 7. They all cannot have the same issue, can they :)

share|improve this question
    
Does it still happen? What were you using the flash-drives for? It’s possible that some program had open handles to files on the flash-drive. –  Synetech Dec 2 '13 at 0:08
add comment

2 Answers 2

Question: How do you remove a USB flash drive from your system? Do you properly unmount it? In windows, this would be do you select the tray icon to gracefully allow you to remove your device.....or do you just yank it out?

If you are yanking it out without properly disconnecting (which flushes any important data out of the system and onto the USB drive, and sets the "clean" bit if you will)....programs are most likely responding to this action.

I'd suggest that for long life and no surprises that you first properly disconnect the system from accessing the USB drive before removal.

The message is detecting previous improper removal, and I'd scan and fix it!

share|improve this answer
    
Agreed. The fix is not to yank out the USB pen drive. Use the 'safe removal' mothod then unplug it. –  Hennes Jan 27 '13 at 9:25
    
I disconnect them through an icon next to the clock on Windows 7. On earlier versions of Windows it is too complicated to do the same, so yes, I do yank them out there. Note that I've been doing this for as long as I remember and it never caused an issue with data or the life span of the USB drive. And, don't blame me for the inability of the OS to provide decent USB removal controls. They issued "a million" updates to that Windows and none addressed this! So the bottom line, you're saying that there's no way to get rid of that message on Windows 7, is there? –  ahmd1 Jan 29 '13 at 0:39
1  
All I can say is its your USB stick...... –  mdpc Jan 29 '13 at 3:04
3  
Actually, if the volume is set to Quick Removal, then Windows does not cache writes, so you shouldn’t need to eject because writes are done immediately. Removable drives are set to Quick Removal by default, which is why ahmd1 has been able to do “just yank it out” for years without problem. –  Synetech Dec 2 '13 at 0:07
add comment

I found this solution on the net:

  1. goto Start
  2. type msconfig
  3. select Services Tab
  4. Scroll down and Uncheck Shell Hardware Detection
  5. Restart Windows
share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.