1583

My kids (4 and 5) yell a lot when playing games on the computer. I found an effective cure for this. When I hear loud noises, I ssh into the game computer and do:

chvt 3;  sleep 15;  chvt 7 

This will turn off the screen for 15 seconds on Linux. I've told them that the computer doesn't like loud noises. They totally believe this and beg the computer for forgiveness. They became much quieter, but not to the level that I would be happy, and so I need to continue this educational process. However, I am not always around to do this manually.

Is it possible to automate this? A microphone is attached to the box. If the level of loudness passes some threshold then I want to run a command.

4
  • 7
    Until they learn to press CTRL + ALT + F7
    – Suici Doga
    Feb 13, 2018 at 13:35
  • 2
    @SuiciDoga Hey; they don't know what's going on!
    – wizzwizz4
    Oct 24, 2018 at 8:39
  • 5
    Congrat for a technical solution. But I think, it is important to say always the truth to the children.
    – peterh
    Jan 30, 2019 at 11:44
  • 4
    It's been 8 years, I hope your kids aren't as gullible or loud now
    – Some Guy
    Mar 22, 2021 at 1:23

6 Answers 6

658

Use sox from SoX to analyze a short audio sample:

sox -t .wav "|arecord -d 2" -n stat

With -t .wav we specify we process the wav type, "|arecord -d 2" executes the arecord program for two seconds, -n outputs to the null file and with stat we specify we want statistics.

The output of this command, on my system with some background speech, is:

Recording WAVE 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
Samples read:             16000
Length (seconds):      2.000000
Scaled by:         2147483647.0
Maximum amplitude:     0.312500
Minimum amplitude:    -0.421875
Midline amplitude:    -0.054688
Mean    norm:          0.046831
Mean    amplitude:    -0.000044
RMS     amplitude:     0.068383
Maximum delta:         0.414063
Minimum delta:         0.000000
Mean    delta:         0.021912
RMS     delta:         0.036752
Rough   frequency:          684
Volume adjustment:        2.370

The maximum amplitude can then be extracted via:

grep -e "RMS.*amplitude" | tr -d ' ' | cut -d ':' -f 2

We grep for the line we want, use tr to trim away the space characters and then cut it by the : character and take the second part which gives us 0.068383 in this example. As suggested by comments, RMS is a better measure of energy than maximum amplitude.

You can finally use bc on the result to compare floating-point values from the command-line:

if (( $(echo "$value > $threshold" | bc -l) )) ; # ... 

If you build a loop (see Bash examples) that calls sleep for 1 minute, tests the volume, and then repeats, you can leave it running in the background. The last step is to add it to the init scripts or service files (depending on your OS / distro), such that you do not even have to launch it manually.

9
  • 291
    I would disrecommend taking the maximum amplitude. It's not nice for the kids when their screen goes blank just because someone clapped or something similar. Average seems more appropriate.
    – orlp
    Feb 1, 2013 at 17:59
  • 37
    Just a clarification, by "average" you mean RMS Amplitude right? The Mean Amplitude is going to be close to 0 if the noise is of a consistent loudness over the 2 seconds (the positive and negative halves will cancel each other out).
    – Luke
    Feb 2, 2013 at 20:10
  • 8
    A simple "energy" detector for a series of samples is to just add the value of all the peaks together. You wouldn't have to even average it if you didn't want to. A peak is just any point where sample[n]>sample[n-1]&&sample[n]>sample[n+1] I've used this as a rudimentary mechanism for measuring the energy of a song and it works quite well. Just search for a magic number at which you're happy with the volume level.
    – Kaslai
    Feb 3, 2013 at 1:45
  • 3
    I would like to see a sample output of your first command when it really comes to a kid yelling, for reference.
    – Alvin Wong
    Feb 3, 2013 at 11:39
  • 3
    For the described usage (start automatically + run every few minutes) a cron job is the right tool to use. Much simpler to setup and more robust than using init script + bash loop + sleep.
    – m000
    Mar 24, 2013 at 14:08
142

Here's how it can be done with Pure Data:

Kid yell prevention using Pure Data

Metro is a metronome, and "metro 100" keeps banging each 100 ms.

The audio is coming from adc~, the volume is calculated by env~. "pd dsp 0" turns off the DSP when banged, "pd dsp 1" turns it on. "shell" executes the passed command in a shell, I use the Linux xrandr API to set the brightness to X, you need to adapt this for Wayland.

As you can see, grace period and locking takes up way more space than audio code does.

Making a solution with ring buffers and/or moving averages should be way easier than doing it with sox. So I don't think it's a bad idea to use Pure Data for this. But the screen blanking itself and the locking doesn't fit with the dataflow paradigm.

The PD file is at gist.github.com: ysangkok - kidsyell.pd.

8
  • 12
    very nice! You could make this to be quite responsive using this technique: track the average sound level over a minute, then use that as the baseline, so that when the kids go over 20 dB above the baseline, it triggers. Then it'll automatically adjust to the ambient sound level. Feb 5, 2013 at 16:33
  • 2
    Yes, that makes sense @Hans-ChristophSteiner. But in a way, wouldn't the ambient noise level actually require the kids to yell louder, since they would make up a smaller proportion of the overall noise? That of course would only apply if the existing noise is white or pink or otherwise ignored. Feb 5, 2013 at 16:40
  • 4
    if it was quieter than usual, like a weekend morning, then it would make it more sensitive, since it would always be 20 dB above the ambient level Feb 5, 2013 at 16:42
  • This is the extended PD?
    – nullpotent
    Feb 9, 2013 at 15:09
  • @iccthedral: I used pd-extended to make it, but I don't know if I used any pd-extended specific constructs. Feb 10, 2013 at 12:56
109

Check "How to detect the presence of sound/audio" by Thomer M. Gil.

Basically it records the sound every 5 seconds, than checks for the sound amplitude, using sox, and decides if trigger a script or not. I think you can easily adapt the ruby script for your children! Or you can choose to hack away on the Python script (using PyAudio) that he has provided as well.

1
  • 7
    What about those outbursts less than 5 seconds that avoid detection?
    – user195344
    Feb 4, 2013 at 10:13
56

You can get information from the microphone by doing something like:

arecord -d1 /dev/null -vvv

You might have to play with the settings a little, such as:

arecord -d1 -Dhw:0 -c2 -fS16_LE /dev/null -vvv

From there on out, it's a simple matter of parsing the output.

49

This is one of the more fun questions that I've seen. I would like to thank tucuxi for such a fine answer; that I have set as a bash script

#!/bin/bash

threshold=0.001
# we should check that sox and arecord are installed
if [ $1 ]; then threshold=$1; fi
while [ 1 -gt 0 ]; do
 if(( $(echo "$(sox -t .wav '|arecord -d 2' -n stat 2>&1|grep -e 'RMS.*amplitude'|tr -d ' '|cut -d ':' -f 2 ) > $threshold"|bc -l) ))
 then
  chvt 3; sleep 5; chvt 7;
 fi
done
1
  • 9
    If you start this running by adding a line to /etc/rc4.d/S99rc.local and then change the input mic from unamplified to 100% you too can end up being thrown over to tty3 (you can jump back before the sleep is over with Ctrl+Alt+F7), and if your keyboard is too loud to open a terminal, to run sudo killall too_loud then Ctrl+Alt+F1 and log in there.) Feb 10, 2013 at 12:45
44

My 2 cents for the C or C++ solution: maybe not the most effective approach, but on Linux, you can use the ALSA API (built-in audio handling library of Linux) and use some numerical technique (for example, calculating the average sound level each second) to obtain the level of noise.

Then you can check it in an infinite loop, and if it's greater than a preset treshold, you can use the X11 library to turn off the screen for some seconds, or alternatively (less elegant, but it works) invoke the chvt command using system("chvt 3; sleep 15; chvt 7 ");.

1
  • 2
    If using command I would consider something different then chvt. ArchWiki has nice examples.
    – A.D.
    Feb 5, 2013 at 13:20

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .