Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I have a Dell E1505 with Windows XP. I decided to install Linux Mint 14 to learn more about Linux as part of my programming job. So I downloaded Mint 14 (Cinnamon), installed it, and it works fine with the Ethernet connection. However, I am not able to connect via WiFi.

Can somebody please explain the steps needed to configure the wireless card driver (Broadcom 4311 chip)?

share|improve this question

Try do add more info about "But I am not able to connect to wireless".

Type in terminal

ifconfig -a

If you see youre wireless chip (wlan$) everysing is OK and you need sometking like wicd or network-manager to connect to AP.

If there are no wlan iface in output, you need to install driver (e.g. compat-wireless).

Good luck

share|improve this answer

1) Depending on your system download 32 or 64 bit package from

2) Go to a terminal to the dir with package.

3) tar -xvzf hybrid-portsrc-.tar.gz Replace version with one you have

4) Install kernel headers (eg. in fedora “yum install kernel-headers”)

5) make -C /lib/modules/uname -r/build M=pwd

if There were no errors

6) Unload Modules from memory rmmod ndiswrapper b43 ssb bcm43xx b43legacy

7) For WPA modprobe ieee80211_crypt_tkip

8)Check if Compiled Module is working insmod wl.ko

Now Probably a new interface will be there for wireless (wlan0 or eth-1) To check it run iwconfig iwlist scanning

Making it load on boot

1)cp wl.ko /lib/modules/uname-r/kernel/net/wireless/

2)depmod -a

3)rmmod wl

4)modprobe wl

5)Add following Lines to /etc/rc.local (in openSuse /etc/rc/rc.d/boot.local)

modprobe wl

share|improve this answer

Install the firmware:

sudo apt-get install firmware-b43-installer

After it's installed, reboot.

I tried everything else with no success. I did this and the wireless immediately came on with no issues.

share|improve this answer

You must Install Driver of your Wirelless card for Linux

befor test your wireless has problem with Driver or Not , for this follow steps

1- reboot system

2- go to grub menu and press e for editiong kernel metod pefor run this 3- befor ro quit insert noapic acpi=off and press enter see your wireless working

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.