Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I work from home and have a Cisco 8000 series router on my desk that provides VPN connectivity to my company's network. The router sits between my ISP-provided router and my computer. While I am connected to the VPN router, I am unable to access other computers/printers on my home network.

Is there a way I can easily switch between the VPN connection and a connection to my home network (bypass the VPN router) without having to disconnect network cables each time? Is there a device I can hook up to allow this? Or a configuration on the router?

I don't need all of the in-depth details (especially if the changes are needed at the router), but rather a good starting place to work from. I can do the research - I just don't know where to start.

Thank you!

share|improve this question

2 Answers 2

You can configure 2 network adapters in your computer in a such way that the default routing would go through your home LAN and only routing to your company internal network would go through the VPN connection.

share|improve this answer
    
Do you have an example configuration I can see? Url? –  Brian Knight Feb 12 '13 at 21:15
    
If you are using windows; plug in second network adapter and a cable to each network, then in the network adapters window select advanced->advanced settings, and you can prioritize the network adapters, just make sure your home one is above the work one and it will be the default. –  Justin Feb 12 '13 at 22:31

Not answering your comment so much as pointing out an alternative -

It sounds to me like your computer is connected as follows:

Internet --- ISP Router ---- VPN Router ---- Your PC

while Other computers are connected

Internet ---- ISP Router ---- Their PC.

Typically an office configuration would put all the PC's behind the VPN router. This should not require much in way of hardware (probably nothing, maybe a switch). Unless your administrator had very good reason for setting it up this way - ie to deliberately isolate you - in which case the answer is "don't use printer etc while connected to VPN), you should consider finding a new network administrator.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.