Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Network printer is legacy HP LaserJet 6MP, plugged into a Windows XP workstation that is acting as our network share and the gateway to our shared storage devices. Others @ office are using the printer fine. I'm running a fresh install of Win7x64, can't for the life of me get this working.

Test page from printer does NOT show IP address, so I'm using the Wizard:

  1. Devices and Printers
  2. Add a printer
  3. Add a network, wireless or Bluetooth printer
  4. The printer that I want isn't listed
  5. Select a shared printer by name > browse
  6. Server computer does NOT show up in the network list
  7. But if I manually type the server name \servername it shows up, and I can see the printers connected to it.
  8. Select the printer I want to connect to
  9. Next. I get the "Connecting to PrinterName on ServerName" dialog.
  10. No driver found error dialog
  11. Press OK. Get the Browse dialog box that says "The file "*.INF" on (Unknown) is needed.
  12. I browse to the exact driver I need for that exact printer, which is extracted to my hard drive. Locate the "prnhp001.Inf" file > OK

Error dialog: Windows cannot connect to the printer. Error code is 0x0214

share|improve this question

migrated from serverfault.com Feb 16 '13 at 3:24

This question came from our site for professional system and network administrators.

    
There's no such thing as a Windows XP server. XP is a workstation OS. –  John Gardeniers Feb 15 '13 at 12:26
    
Fine. Updated the OP. The computer that acts as our network share and to which the printer is connected is a windows XP workstation. –  Tom Auger Feb 15 '13 at 16:28
2  
If I had to guess, you're trying to connect from your 64-bit Windows 7 workstation to a printer installed on a 32-bit Windows XP installation and you're trying to install the 32-bit drivers. You need 64-bit drivers for a 64-bit client. –  RobM Feb 15 '13 at 16:33
    
@RobM I think architecture had something to do with it. The drivers I had (Microsoft driver update for HP LaserJet 6P-6MP PostScript) had a subfolder called Ia64. I located another similarly titles .cab but it expanded to reveal a folder called AMD64. That driver worked. –  Tom Auger Feb 15 '13 at 21:48

3 Answers 3

up vote 0 down vote accepted

The drivers that I had were 32-bit drivers, and my system architecture was x64. Once I located the appropriate 64-bit drivers, they were able to install without too much hassle.

share|improve this answer

First, I would make sure both machines are on the same workgroup. Right-Click --> My Computer --> Properties

Second, you could type in the XP machines address like so \\192.168.0.101\ The ending slash will find any available attached drives, or hardware for use.

Third, be sure network and sharing are turned on for the XP machine sharing the printer. http://compnetworking.about.com/cs/winxpnetworking/ht/winxpsfs.htm

share|improve this answer

Instead of installing a network printer choose local printer , than add standard tcp/ip port and enter the printers IP address.

That's It !

share|improve this answer
    
LaserJet 6 doesn't have a network interface, it won't even take a JetDirect card. Thus, it can't have an IP address. –  mfinni Feb 14 '13 at 17:47
    
I also mention in my OP that I cannot determine the printer's IP address in the test page. –  Tom Auger Feb 15 '13 at 16:29
    
You can't determine the printer's IP address because it doesn't have one. –  mfinni Feb 15 '13 at 18:45
    
@mfinni Got it lol –  Tom Auger Feb 15 '13 at 20:35

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.