Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

This question already has an answer here:

I have accidentally spilt coffee on my keyboard. I unplugged it and let it dry for half an hour, then I reattached it and it worked perfectly for one hour of continuous use - but then I tried a couple of keys and realized that the Caps Lock key not only activates the Caps Lock, but also types 3. The same happens with the 3 key: it types 3 but also activates Caps Lock.

Something similar happens with another couple of keys on the left hand side of the keyboard. Eventually, I unplugged the keyboard, and I will leave it for a couple of days until I plug it back in and see if it works properly.

Any suggestions? Is it possible to fix it? Is there still moisture inside it? What do you think?

I have to mention that it is a Razer model, so an expensive "mechanical" keyboard.

share|improve this question

marked as duplicate by Excellll, gronostaj, Kevin Panko, random Aug 31 '14 at 3:28

This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.

4 Answers 4

Disassemble it. Rinse it in clean water. Dry it thoroughly. Put it back together.

You really should have done this immediately though. Having power on with coffee in it may have corroded the contacting surfaces.

share|improve this answer
2  
You'll want Deionized/distilled water. –  Kruug Feb 19 '13 at 20:48
    
@Kruug As long as it's at least normally clean water and the keyboard is dried thoroughly, why would it matter? –  David Feb 19 '13 at 20:51
    
Thanks but you know it worked great for a whole hour and then happened what I described before. So is there still possibility to work again eh? –  Tech Guy Feb 19 '13 at 20:52
    
***It is mechanical keyboard –  Tech Guy Feb 19 '13 at 20:56
    
I've never had to repair a mechanical keyboard, so I'm not sure, but what do you have to lose? –  David Feb 19 '13 at 21:02

I had the same problem on a 4 year old LG keyboard around 24 Aug 2014. A full cup of instant strong coffee went onto keyboard (with sugar, sweeteners, etc.)

I did following to resolve the problem :

  1. Immediately disengaged keyboard from PC.
  2. Went to sink and slowly poured about 8 liters of water (sourced from the mountains) all over keyboard to give it a thoroughly good rinsing.
  3. Shook all water from keyboard several times during each rinsing.
  4. Waited for about 3 days to make sure ALL water inside the keyboard had evaporated.
  5. Plugged the keyboard into the desktop computer after a few days.

The keyboard seemed to work fine.

Main thing is to remove all coffee from inside of the keyboard, i.e. gums up the moving parts, contacts, electronics etc.

share|improve this answer

Is it a Black Widow or one of the other keyboards? The behavior you describe sounds like the layers of plastic that get pushed together have residue between them. When one key gets depressed, the residue allows multiple circuits to be completed. The best bet is to disassemble the keyboard, remove the cellophane sheets, carefully peel them apart and rinse it down. Generally this can even be done with soapy water as long as you make sure you rinse it clean of all residue. This should prevent the shorts that you are getting. It also may be worth washing the plastic parts in the dish washer while the electronics are removed to get them thoroughly cleaned.

Personally, I've never done it on one of my Black Widows, but I did it on my G15 that I had before the Black Widow.

share|improve this answer
    
And it worked when you did that? –  Tech Guy Feb 19 '13 at 21:52
    
@TechGuy - yeah. The principal behind a keyboard is relatively simple as far as electronics go. You are just actuating a switch which presses two surfaces together which are normally separated. The problem you describe is simply a short. There isn't normally any particularly sensitive electronics on the film the conductors are embedded in, just wires basically. –  AJ Henderson Feb 19 '13 at 22:02
    
An update to the current status of my keyboard: –  Tech Guy Feb 20 '13 at 11:13
    
I have it off for about half a day without cleaning it, just letting it dry naturally with the keyboard side looking down, I tried to plug it about 20 mins ago and worked perfectly. I have to mention that not much coffee entered the keyboard at the first time of the accident, so I think that keeping it in that way therefore letting it to dry naturally, it will be ok. –  Tech Guy Feb 20 '13 at 11:20
    
@TechGuy - cool, glad to hear it –  AJ Henderson Feb 20 '13 at 14:27

My keyboard acted abruptly the same way.

  1. I opened up the keyboard & removed each & every key.
  2. Cleaned the inside of the keyboard casing with water spray.
  3. Cleaned each & every foam element & key with water.
  4. Cleaned the electronic membrane. (Make sure you handle it with care.) First rubbed it with a rubber & then wiped it with spirit. Then dried it in the sun.
  5. Made sure each & every component was dried.
  6. Fixed everything back & it worked well.
share|improve this answer

Not the answer you're looking for? Browse other questions tagged or ask your own question.