Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I went to a computer store to buy a LAN(Ethernet) cable and they asked me whether I want to connect two PCs or a PC to a router. I used to do both using same cable and it worked for me till I lost the cable. Is there really two different kind of LAN cables(other than performance types) for connecting two different PCs and a PC to a Router. If yes what is the difference between them?

share|improve this question

3 Answers 3

up vote 8 down vote accepted

In the past it was a requirement to use cross-over cable to connect PC to PC or hub to hub or switch to switch. The straight-through was used to connect PCs to networking equipment. Presently, most networking devices as well as PC NICs are implementing auto-MDIX feature that allows you to use straight-through cable to interconnect switches or two PCs. Moreover, if you get the cross-over cable that have only two pairs twisted most likely your 1Gb adapters would not negotiate 1Gb speed. So, the straight-through cable is the one you need.

share|improve this answer

Yes, there is. What you are describing is called a crossover cable:

An Ethernet crossover cable is a type of Ethernet cable used to connect computing devices together directly. Normal straight through or patch cables were used to connect from a host network interface controller (a computer or similar device) to a network switch, hub or router. A cable with connections that "cross over" was used to connect two devices of the same type: two hosts or two switches to each other. Owing to the inclusion of Auto-MDIX capability, modern implementations of the Ethernet over twisted pair standards usually no longer require the use of crossover cables.

share|improve this answer
    
Yeah, that's one of the best things with gig-e (other than the speed ;p). –  Journeyman Geek Feb 23 '13 at 11:41

For modern hardware you should never need a crossover cable. I have a lot of network equipment but zero crossover cables and everything works no matter how I connect it up (using regular patch cables).

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.