Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

What is a good command line tool to get the video bitrate of a divx or xvid avi file for linux?

share|improve this question
up vote 14 down vote accepted

You can use MPlayer to get that information.

$ mplayer -vo null -ao null -identify -frames 0 foo.avi

In particular, you want the -identify option. The option -frames 0 tells it not to playback the file, and -vo null -ao null give it null drivers for video & audio (so you can use this command via SSH or another non-X-enabled terminal).

You can combine this with grep or other tools to pull out the specific line you want:

$ mplayer -vo null -ao null -identify -frames 0 foo.avi | grep kbps
VIDEO:  [XVID]  512x384  24bpp  29.970 fps  990.9 kbps (121.0 kbyte/s)

The full output looks like this:

$ mplayer -vo null -ao null -identify -frames 0 foo.avi
MPlayer dev-SVN-r26940 (C) 2000-2007 MPlayer Team
CPU: [hw dependent]
CPUflags:  [hw dependent]
Compiled with runtime CPU detection.

Playing foo.avi.
AVI file format detected.
ID_VIDEO_ID=0
[aviheader] Video stream found, -vid 0
ID_AUDIO_ID=1
[aviheader] Audio stream found, -aid 1
VIDEO:  [XVID]  512x384  24bpp  29.970 fps  990.9 kbps (121.0 kbyte/s)
Clip info:
 Software: transcode-1.0.2
ID_CLIP_INFO_NAME0=Software
ID_CLIP_INFO_VALUE0=transcode-1.0.2
ID_CLIP_INFO_N=1
ID_FILENAME=foo.avi
ID_DEMUXER=avi
ID_VIDEO_FORMAT=XVID
ID_VIDEO_BITRATE=990928
ID_VIDEO_WIDTH=512
ID_VIDEO_HEIGHT=384
ID_VIDEO_FPS=29.970
ID_VIDEO_ASPECT=0.0000
ID_AUDIO_FORMAT=85
ID_AUDIO_BITRATE=135104
ID_AUDIO_RATE=0
ID_AUDIO_NCH=0
ID_LENGTH=1288.95
ID_SEEKABLE=1
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
ID_VIDEO_CODEC=ffodivx
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
ID_AUDIO_BITRATE=128000
ID_AUDIO_RATE=48000
ID_AUDIO_NCH=2
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [null] 48000Hz 2ch s16le (2 bytes per sample)
ID_AUDIO_CODEC=mp3
Starting playback...

Exiting... (End of file)
share|improve this answer
1  
ps. the mplayer manpage is a nightmare ... – quack quixote Oct 15 '09 at 15:18
    
For those unaware, this is essentially what midentify.sh does, the script which ships with mplayer. – Jonah Braun Nov 13 '11 at 23:41
    
The flags need to be updated. I get 'invalid option -- 'o' in Ubuntu 13.04 – hnns Aug 19 '13 at 19:53

ffmpeg works fine:

ffmpeg -i file.avi
share|improve this answer
    
ffmpeg prevails where mplayer fails. – dom0 Aug 25 '14 at 18:43
    
Some recent distributions (Debian, Ubuntu 14) dropped ffmpeg and instead shipped its libav fork, so you might need to install libav-tools and run avconv -i instead of ffmpeg -i – bain Jan 22 '15 at 17:08
avprobe -show_streams file.avi
share|improve this answer
1  
To show the overall bit rate, you'd be better off using -show_format, or even better (on *nix) avprobe -show_format file.avi | grep bit_rate. The same syntax will also work for ffprobe. – evilsoup Jun 25 '13 at 19:23

Here's another tool that does the same thing: tcprobe, which is part of the transcode package. Use the -i switch to get an info dump from the file (sample output from the same file as in the mplayer example):

$ tcprobe -i foo.avi
[tcprobe] RIFF data, AVI video
[avilib] V: 29.970 fps, codec=XVID, frames=38630, width=512, height=384
[avilib] A: 48000 Hz, format=0x55, bits=16, channels=2, bitrate=128 kbps,
[avilib]    53707 chunks, 21768720 bytes, VBR
[tcprobe] summary for foo.avi, (*) = not default, 0 = not detected
import frame size: -g 512x384 [720x576] (*)
       frame rate: -f 29.970 [25.000] frc=4 (*)
      audio track: -a 0 [0] -e 48000,16,2 [48000,16,2] -n 0x55 [0x2000] (*)
                   bitrate=128 kbps
           length: 38630 frames, frame_time=33 msec, duration=0:21:28.954
share|improve this answer

Here is a copy-paste bash answer using avprobe (which comes with avconv and maybe ffmpeg) in case you want only the number (for further scripting)

function bitrate () { avprobe -show_format "$1" 2> /dev/null | grep "bit_rate" | sed 's/.*bit_rate=\([0-9]\+\).*/\1/g'; }

It works like this. This line gets info about the file (removing extra info on stdout):

avprobe -show_format test.mp4 2> /dev/null

Then grep selects the line which mentions bitrate

grep "bit_rate"

From which sed then extracts the bitrate (in bits/second)

sed 's/.*bit_rate=\([0-9]\+\).*/\1/g';

Long story short, copy the function in the first line and then you can do

$ bitrate test.mp4
593567

(that's not a high-quality video, 593 kb/s, since bitrate uses 1000 instead of 1024 apparently)

share|improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .