Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have foldmethod=indent set in my ~/.vimrc, and in general that works for me and I'd like to keep it.

However, there are a few files I have which I edit regularly (and which are under my exclusive control), where I'd like to add in a marker-based system, in particular so that when I open the file a large section I rarely look at (which is already 'delimited' by indent) is pre-folded. It looks like foldmethod=marker would allow me to do that (I don't mind the odd comment in the file to indicate these 'pre-folds' if necessary), but I still want foldmethod=indent set so that I can use zc, zo, and so on to then fold or unfold sections by indent. As far as I can tell I can't set foldmethod to multiple values.

Is there another way I can achieve this (ideally using something embedded in the file itself)?

share|improve this question

1 Answer 1

up vote 3 down vote accepted

Each window can have its own local value of 'foldmethod'; what you set in ~/.vimrc is just the global default. There are multiple ways to set a different local value for a particular buffer:

  1. Manually with :setlocal foldmethod=marker
  2. For a particular filetype (e.g. Java files): :autocmd FileType java setlocal foldmethod=marker (or in ~/.vim/after/ftplugin/java.vim)
  3. For particular file(s): :autocmd BufRead /path/to/file setlocal foldmethod=marker
  4. Inside the file itself via a modeline (since you have to add the markers anyway, I would prefer this):

/* vim: set fdm=manual : */

There still can be only one fold method inside a single window. If you want to employ different strategies, you have to choose a more flexible method (e.g. expr), and re-implement the "other" method(s) in there (e.g. by making your 'foldexpr' consider the indent). Or you use two window splits for the same buffer, and set different foldmethods for each split.

Since that probably isn't what you want to hear, you could hack something together with an :autocmd CursorMoved that switches the foldmethod based on the current line:

" Use markers when in the first 100 lines, else use indent.
:autocmd CursorMoved,CursorMovedI <buffer> let &l:foldmethod = (line('.') <= 100 ? 'manual' : 'indent')
share|improve this answer
1  
Thanks. So this tells me I can set foldmethod to marker inside that buffer. But what I'm looking for is something that still allows me to use the indent foldmethod, whilst have some sections (which are delimited by an indent) pre-folded. If I do (4) above, zc, zo, and so on will no longer work as intended in that buffer. I've clarified my question. –  Andrew Ferrier Mar 3 '13 at 11:50
    
Your question wasn't clear in that aspect, thanks for the clarification. I've amended my answer. –  Ingo Karkat Mar 3 '13 at 12:34
    
Yes, apologies if I wasn't clear. The foldexpr sounds like the best approach but also complicated. I'll give it a try though. +1 for the pointer. –  Andrew Ferrier Mar 3 '13 at 12:38
    
Thanks again. I have been trying to write the foldexpr and opened a related Q here which may be of interest: superuser.com/questions/560167/… –  Andrew Ferrier Mar 3 '13 at 12:55
    
@IngoKarkat: In the first paragraph below the line you wrote that there can be only one fold method per buffer. I believe that should be per window. –  garyjohn Mar 3 '13 at 19:07

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.