Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

On a homebrew computer I've installed a Intel DX79SR Mainboard, changed the BIOS mode to UEFI and installed Windows 8.

I further switched UEFI to fast booting, which works nicely.

Now I wanted to boot into the UEFI firmware settings from Windows 8, but the option to do so is missing from the advanced boot options. Instead of the 6 advanced Options as described in this article I only see 5. The UEFI Option is missing.

Luckily the mainboard itself has a rescue option, but I wonder how I get Windows 8 to recognize my UEFI bios? Shouldn't it be possible to boot into the UEFI settings from Windows itself?

share|improve this question

If you installed Windows 8 the U/EFI way you should be able to access UEFI options.

To check if you boot UEFI way - when in Windows run on admin command prompt:


output lists bootmgr and loader/s.

for example:

    Windows Boot Loader

identifier              {current}
device                  partition=C:
path                    \Windows\system32\winload.efi
description             Windows 8

If path ends in .efi - you boot U/EFI way

else path ends in .exe - you boot BIOS way.

To install Windows 8 the UEFI way you have to boot installation media (USB/DVD) the UEFI way.

UEFI firmware usually allows BIOS booting (over CSM) and UEFI booting for DVD/USB.

Destination disk for installation must be a GPT style disk.

When converting a MBR disk to GPT disk (usually) existing partitions are lost.

share|improve this answer
Mine had .efi bit still the UEFI option is missing as described in the question – CodeBlend Oct 2 '13 at 11:56

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .