Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I got this issue today where the computer first began to 'hang' and then the screen momentarily turned black and came back again with a pop up saying that the display driver stopped working and has been recovered.

The fix suggested was upgrading the drivers. So, opened the device manager and right click on appropriate device and click on update driver. Windows then says that the drivers are all updated.

Then, why is the issue persistent ?

I downloaded these drivers from HP's website. I remember I was told not to download drivers from the vendor's site as it may prevent HP from sending updates. I believe the drivers are outdated.

Do I download the drivers from the vendor's website ? if yes, which one ?

Display Adapters

Intel Graphics Media Accelerator HD (8.15.10.1986 A)
Ati Radeon HD 4550 (8.713.0.0 B)

Misc

Laptop: HP Pavilion DV4-2126tx
OS: Windows 7 Home Premium, 32bit

share|improve this question
    
Err, Intel and ATI are 2 different vendor. Can you check which one is inside your system? –  Martheen Cahya Paulo Mar 25 '13 at 4:32
    
@MartheenCahyaPaulo it is switchable. When not in AC, it uses the low power Intel. If in AC, it uses ATI. I can manually switch, too –  Little Child Mar 25 '13 at 4:33
    
New drivers are generally only meant to optimize new games anyway. This is less likely a driver problem if your laptop run just fine before. I would check for overheating problem –  Martheen Cahya Paulo Mar 25 '13 at 4:47
    
@MartheenCahyaPaulo it had happened a loong time ago a couple of times, too, but I dismissed it as a random incident :/ –  Little Child Mar 25 '13 at 4:50
2  
Exactly, random error are usually from overheating problem. –  Martheen Cahya Paulo Mar 25 '13 at 4:54

2 Answers 2

up vote 3 down vote accepted

Microsoft provides a KB article about the issue:

"Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista

http://support.microsoft.com/kb/2665946/en

Change the TdrDelay value to 8 and look if this fixes it.

share|improve this answer

Check all capacitors of your graphic card. That problem may be from the capacitor.

share|improve this answer
    
More info would improve this. However, the issue appears to be a known software issue. –  Dave M Oct 2 '13 at 19:44

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.