Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I've installed Windows 7 on my system, and made three partitions: one of 180 GB, one of 210 GB and one of 75 GB. I've made a bootable DVD with Fedora 18 from an ISO file and installed Fedora on the partition of the size of 75 GB. Nice and smooth.

Too smooth, because after rebooting the system, I received the alert that my Windows has been affected, but could still access it normally and couldn't notice anything different. I've rebooted the system again, but I couldn't choose whether to start Fedora or Windows, it automatically started on the second one.

Of course, the partition with Fedora can neither be seen under Windows, nor be chosen at the startup. So, how could I regain my Fedora-partition and make it work? (be gentle, I'm a novice)

EDIT: I've followed the instructions shown by how to dual boot fedora 18 and windows 8?, but it didn't work. At the startup it showed the following error message: Error 15 Can't find file find --set-root --ignore-floppies /boot/tboot.gz What should/could I do?

EDIT: I've reinstalled Fedora normally (with authomatic partitioning and stuff) and it went smooth. Really smooth. Note to self and others: Unexplicable things happen when Linux and Windows meet. Be prepared! :)

share|improve this question

1 Answer 1

You have to add GRUB to the Windows bootloader's menu. You can do that using EasyBCD, I've described it here (near the end of an answer). If that's not enough, you'll have to reinstall GRUB (also described there). To find out how your drive is called you can use the command fdisk -l.

share|improve this answer
1  
Please create a separate question so others can see it. –  gronostaj Mar 30 '13 at 21:27
    
@Eszter You should create a separate question for that problem. Please include the model of your touchpad in the details. –  Seth Mar 30 '13 at 21:35
    
So, I've tried to complete the steps you've described, gronostaj, but when entering manual partitioning, I can't apply the changes of the mount point to the root, moreover, the name of it isn't sda1, sda2, or sd3, but "root" (my boot is sda5). –  Eszter Mar 30 '13 at 21:40
    
your description hasn't been very useful unfortunately, because I can't get the manual partitioning right. I think Fedora is not for me. Thanks, though. :) –  Eszter Mar 30 '13 at 22:11
    
Skip the installation part, only find out your partition's name with the command I gave you and apply the EasyBCD step, if it won't work then repeat from the GRUB installation step. –  gronostaj Mar 31 '13 at 6:01

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.