Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Each time the machine (Linux, RHEL) reboots, it waits for F1 key to be pressed in order to continue the boot process. How can I skip this ?

These are the message :Node3 DRAM uncorrected ECC Error,Node0 HT Link SYNC Error,Node1 HT Link SYNC Error,Node2 HT Link SYNC Error,PRESS F1 To Resume

I searched a bit on the internet, but didn't find an answer that is testable.

share|improve this question

migrated from stackoverflow.com Apr 1 '13 at 16:04

This question came from our site for professional and enthusiast programmers.

1  
Exactly what message is displayed while the system is waiting for you to press F1? –  Michael Kjörling Apr 1 '13 at 16:25
    
@MichaelKjörling: Sorry for a late reply, These are the message :Node3 DRAM uncorrected ECC Error,Node0 HT Link SYNC Error,Node1 HT Link SYNC Error,Node2 HT Link SYNC Error,PRESS F1 To Resume –  iamauser Apr 4 '13 at 14:36

3 Answers 3

This has nothing to do with the operating system. It's a BIOS thing.

You need to enter BIOS just when you power up the computer with one of the following keys:

[DEL] [F2] [F9] [F10] [F11] [F12] depends on BIOS type, you should be shown the key that enters Setup during POST

Then go into the basic settings and change the setting for keyboard errors.

share|improve this answer

These errors could also be caused by Bios and Firmware. Depending on the system maker you could be running into a bios or firmware bug as well.

The easiest way would be to update the firmware and Bios from the manufacturers provided methods. I know Dell and HP both have discs that will update an entire machine. I am not sure about others, but they should have something similar or individual files that can be used to update components.

share|improve this answer
    
-1, you mentioned some possible causes of the OP problem, but have not addressed his question of how to skip (or presumably fix) the problem. Can you elaborate? –  dav Apr 4 '13 at 16:37

With those errors, I'd say your motherboard is likely broken. They have nothing to do with what operating system you are using.

The easiest (most pragmatic) solution would be to simply replace the motherboard and possibly the RAM.

If you are willing to use a broken computer (I wouldn't be...), you may be able to go into the BIOS setup and disable the hardware which you are being warned about. But since the messages talk about the system RAM (Node3 DRAM uncorrected ECC Error) as well as apparently CPU hyperthreading (Node0 HT Link SYNC Error, Node1 HT Link SYNC Error and Node2 HT Link SYNC Error), I doubt that would be a viable approach.

Has the system by any chance suffered a voltage spike or anything along those lines?

share|improve this answer
    
Not that I know off! We see this problem on a batch of machines. It is a scary to think that motherboards of more than 10 machines are gone bad in a batch of 30 machines... –  iamauser Apr 4 '13 at 15:06

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.