Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

When I want to open my USB flash drives, it has an error with the below text:

There was a problem starting~$WUDFFPBD.FAT
The specified module could not be found.
share|improve this question
1  
Have you tried it on another port or better... another computer? –  kush Apr 4 '13 at 8:18
    
yes but it doesn't work –  parham Davarzani Apr 4 '13 at 11:07

2 Answers 2

OK Parham, I think you have a malware on your memory, anyway check this out,like photo :
1- goto folder option
2- select view tab
3- check show hidden files and folders
4- uncheck Hide protected operating system ....
5- click on Apply button and check your memory again

enter image description here

My Previous advice :)

If your mean is your cool-disk or your memory disk so try to format it via HP USB Disk Storage Format Tool

HP USB Disk Storage Format Tool is a tiny freeware utility which has been designed for the HP Drive Key or DiskOnKey USB 2.0 devices. Installing it does not represent a problem whatsoever, since it is very compact and it can be run out-of-the-box, i.e. no installation is actually required.

but if your mean is your motherboard ports, goto device manager and re-install your USB drivers again ... enter image description here

share|improve this answer
    
i don't want to format it because i need its information. when i open the USB drive there is a shortcut that its size is 1KB and when i want to open that shortcut i receive a message with that text i said in my question. –  parham Davarzani Apr 4 '13 at 11:19
    
tnx for your answer i did it before but it didn't work too –  parham Davarzani Apr 4 '13 at 11:45
    
check this way, goto Command (cmd), and goto your memory letter for example you should write like this : "E:" and push the enter! now, write "dir /ah", push the enter again. do you see all of your files and folders on your memory ??? –  Sam Apr 4 '13 at 11:52
    
i did it and i received the below text date <DIR> date 0 autorun.inf date 3,337.ini date 763,760 Thmbs.db 3 Files 767,097 bytes 1 Dirs 2,370,711,552 bytes free –  parham Davarzani Apr 4 '13 at 14:35
    
@Mike: you don't get "a" malware. You get SOME malware. Just like you don't have "a" software. Or "a" water. If you want to talk about a single instance of malware, you would say "a piece of malware". Generally people say "you have malware" because it is an unknown quantity of malware. –  Austin ''Danger'' Powers Jun 29 '13 at 0:06

This looks similar to this question

USB flash drive empty folders

I would recommend you to try connecting your USB Drive to Linux Operating System and check if you can open the files.

If the files are not present, you can use tools like Recuva and try to recover your files.

share|improve this answer

protected by Community Nov 21 '13 at 4:00

Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.