I have a HP Pavilion g6 1232a, the monitor flickers/turn white when I move the monitor. If I'm lucky I might just get it to show the right things. What is causing this, it can't be the monitor caused it works when at a certain angle.
closed as not constructive by Ƭᴇcʜιᴇ007, Brad Patton, 8088, Breakthrough, Dave M May 16 '13 at 0:17
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance. If this question can be reworded to fit the rules in the help center, please edit the question.
This is very often the cable that goes 'through' the hinges from the laptop case to the display.
If you are brave and able to open the case you can sometimes get to the connector, which is usually a flat plastic cable with conducting 'tracks' that is just inserted into its receiving end on the motherboard and held there by friction. This means that if the error is there, you could try to pull the cable out and put it back in.
But, more likely, the cable has a break/tear near the hinges, because it flexes there all the time.
So I really suggest you bring the laptop to a repair shop. They have seen these things before and may be able to replace the cable.