Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

The pci slot address shown is same as the one shown for on board ethernet card. There is a conflict. Not sure how to resolve it.

Various command output are

 dmidecode -t 9 | grep 'Bus Address'

    Bus Address: 0000:08:00.0
    Bus Address: 0000:04:00.0
    Bus Address: 0000:05:00.1

lspci|grep 'Gigabit'
09:00.0 Ethernet controller:  <card name >
0a:00.0 Ethernet controller:  <card manufacturer name>

 biosdecode|egrep 'slot'

    Slot Entry 8: ID 0a:00, slot number 24
    Slot Entry 17: ID 0b:01, slot number 34
    Slot Entry 18: ID 02:00, slot number 4

we can see that slot entry 8 has same pci bus address 0a:00 which is same as for on board ethernet controller.

Not sure why is it showing or how to fix this issue? If I change the pci card slot will it do any good? What should be doing next to resolve the issue ?

share|improve this question

You must log in to answer this question.

Browse other questions tagged .