Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Specifics:

  • HP Pavilion Elite HPE-350t CTO Desktop PC
  • Windows 8 Pro
  • Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz 2.80 GHz Processor
  • 64-bit Operating System, x64-based processor
  • ATI Radeon HD 5450 Graphics Card
  • Vizio E221VA Monitor
  • Acer X191W Monitor
  • Two VGA cords
  • One Digital to VGA converter
  • My HP has two DVI ports and one VGA port. Right now I can connect each monitor to the DVI that's converted to VGA and get them to work individually. When I try connecting both by connecting my Vizio to the DVI converted VGA and the acer to the VGA, the computer always only detects the monitor connected to the DVI converted to a VGA.

    share|improve this question
        
    It should be a matter of simply hooking up both monitors to the desktop. What graphics card do you have, that system, has 10+ different graphic card options I am not going to look up every single one to determine whch does not support dual-monitors. If the digital to vga cable worked just use that. Your question leaves a great number of questions. –  Ramhound May 24 '13 at 17:40
        
    So sorry for not putting that on the specifics!: Radeon HD 5450 –  Seth Urquhart May 24 '13 at 17:45
    1  
    Update your question....Be sure the current version of ATI Eyefinity is installed. A VGA to HDMI cable will work in a case like this. Your current adapter won't cut it. If using the adapter on the DVI-D port and the VGA port on the other monitor doesn't work, it means, you need additional hardware. –  Ramhound May 24 '13 at 17:52
        
    Do I need another DVI-D converter to VGA? –  Seth Urquhart May 24 '13 at 18:20
    add comment

    1 Answer

    Agree update your drivers for the card. Uninstall the drivers and then re-install. That way any funky setting you may have chosen are reset. Type of monitor shouldn't matter. Also see if your monitor works when connected to the VGA port by itself. I have done what you are doing in the past just because of cables available and it has worked. Did you add the card after market? If so make sure your power source is sufficient, PC makers ship with the lower wattage power supply. On my old HP when I changed cards I had to change power supplies too. You need >400w.

    share|improve this answer
    add comment

    Your Answer

     
    discard

    By posting your answer, you agree to the privacy policy and terms of service.

    Not the answer you're looking for? Browse other questions tagged or ask your own question.