0

Using VirtualBox 4.2.12, I've set up a Lubuntu 13.04 VM on a Windows 7 host. I specified a USB filter for my Galaxy S, but neither the VM nor VirtualBox detects it.

After searching the internet, I found vboxmanage list usbhost, which does not show my device connected. However, adb devices does list the device, and I can see it in Device Manager. All drivers on the host are up to date.

It seems to me that if I can get VirtualBox to recognize the device, I shouldn't have a problem getting the VM to. So, how come VirtualBox doesn't?

Improve this question
2

1 Answer 1

Reset to default
0

I got it working. There were a couple of things that I learned that might be helpful. First of all, I was following this guide.

VirtualBox currently has problems with USB 3 ports. Check that your device is plugged into a USB 2 port. After I did that, my device was able to be detected by vboxmanage list usbhost on my Windows host.

Unfortunately, this didn't completely solve my issue. VirtualBox would list the phone under the Devices menu, and I could select it, but Lubuntu gave me no indication that a device was connected. In fact, lsusb and adb devices both came up empty. I ran dmesg and found this error message:

[ 846.648000] usb 1-1: new high speed USB device using ehci_hcd and address 1
[ 846.675000] usb 1-1: device descriptor read/64, error -32
[ 846.884000] usb 1-1: device descriptor read/64, error -32

I found the following thread and set this variable, which solved my problem.

echo Y | sudo tee /sys/module/usbcore/parameters/old_scheme_first

EDIT I discovered that the problem came up again during restart. After a LOT of trial and error, I found that each time I start up, I have to connect the Android device, then set the old_scheme_first variable, then disconnect and reconnect the device before the VM would recognize it. It's an annoying process, so if anyone has any insight, I'd appreciate it. On the other hand, it's a VM, so I won't have to restart it often =)

Improve this answer
2
  • Figured anything more out? I have the same issue except nothing in dmesg. vboxmanage sees the device and I setup VBox with the extensions and added my device in the usb settings, but nothing in the guest OS. Maybe because I am using Linux Mint?
    – Jacob Phillips
    Oct 5, 2013 at 6:22
  • @JacobPhillips Sorry, I don't have any more info for you. It's been a while since I've dealt with the issue. Make sure you're not trying to use a USB 3 port?
    – Robert Li
    Oct 8, 2013 at 13:36

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .