Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I am not able to connect internet through Reliance Netconnect+ on my Fedora 14? It is working properly on Windows.

Whenever I run wvdial command, I see below error:

--> WvDial: Internet dialer version 1.61
--> Cannot open /dev/ttyUSB0: No such file or directory
--> Cannot open /dev/ttyUSB0: No such file or directory
--> Cannot open /dev/ttyUSB0: No such file or directory

I see below logs while connecting to device:

    Jun 12 09:53:35 localhost kernel: [ 2180.144145] usb 4-2: new full speed USB device using uhci_hcd and address 2
    Jun 12 09:53:35 localhost kernel: [ 2180.294153] usb 4-2: New USB device found, idVendor=12d1, idProduct=1505
    Jun 12 09:53:35 localhost kernel: [ 2180.294163] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
    Jun 12 09:53:35 localhost kernel: [ 2180.294171] usb 4-2: Product: HUAWEI Mobile
    Jun 12 09:53:35 localhost kernel: [ 2180.294176] usb 4-2: Manufacturer: HUAÿWEI TECHNOLOGIES
    Jun 12 09:53:35 localhost kernel: [ 2180.294182] usb 4-2: SerialNumber: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
    Jun 12 09:53:35 localhost mtp-probe: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-2"
    Jun 12 09:53:35 localhost mtp-probe: bus: 4, device: 2 was not an MTP device
    Jun 12 09:53:35 localhost kernel: [ 2180.670958] Initializing USB Mass Storage driver...
    Jun 12 09:53:35 localhost kernel: [ 2180.671294] scsi5 : usb-storage 4-2:1.0
    Jun 12 09:53:35 localhost kernel: [ 2180.671415] usbcore: registered new interface driver usb-storage
    Jun 12 09:53:35 localhost kernel: [ 2180.671417] USB Mass Storage support registered.
    Jun 12 09:53:36 localhost kernel: [ 2181.677229] scsi 5:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 0
    Jun 12 09:53:37 localhost kernel: [ 2181.707188] sr1: scsi-1 drive
    Jun 12 09:53:37 localhost kernel: [ 2181.709536] sr 5:0:0:0: Attached scsi generic sg2 type 5

On running command

usb_modeswitch -H -v 0x12d1 -p 0x1505


    Looking for default devices ...
     Found devices in default mode or class (1)
    Accessing device 002 on bus 004 ...
    Using endpoints 0x08 (out) and 0x87 (in)
    Using endpoints 0x08 (out) and 0x87 (in)
    Inquiring device details; driver will be detached ...
    Looking for active driver ...
     OK, driver found ("usb-storage")
     OK, driver "usb-storage" detached

    SCSI inquiry data (for identification)
    -------------------------
      Vendor String: HUAWEI
       Model String: Mass Storage
    Revision String: 2.31
    -------------------------

    USB description data (for identification)
    -------------------------
    Manufacturer: HUA�WEI TECHNOLOGIES
         Product: HUAWEI Mobile
      Serial No.: �������������������
    -------------------------
    Sending Huawei control message ...
     OK, Huawei control message sent
    -> Run lsusb to note any changes. Bye.

I ran below command also but no luck.

modprobe usbserial vendor=0x12d1 product=0x1505

Ran wvdial after above command:

--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.

What can I do to make Reliance Netconnect+ run on my linux machine - Fedora 14?

share|improve this question

migrated from stackoverflow.com Jun 12 '13 at 8:07

This question came from our site for professional and enthusiast programmers.

1 Answer 1

Hi try using Sakis3g script.

Go to google and search for 'sakis3g source forge' download the script and copy to /usr/bin untar the file

    sudo chmod +x sakis3g
    sudo sakis3g

Once the window opens up choose connect 3g -> interface #3 - > apn username & password

Hit ok and it should connect

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.