Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

If I have a 500GB SATA can I clone that to a 256GB SSD?

What is the procedure involved to do that correctly.

share|improve this question

marked as duplicate by Journeyman Geek, Tog, gronostaj, tombull89, mpy Jun 28 '13 at 15:34

This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.

    
You would have to make split the parition into 2. Clearly you cannot fit 500GB of data into a 256GB drive. Once you do that something like corsair.com/en/ssd/ssd-accessories/… will fit your needs. You could also just use Acronis True Image, Clonezilla, or dd –  Ramhound Jun 27 '13 at 15:35
    
Feel free to mark any of these as the answer. –  user88311 Jun 27 '13 at 18:31
add comment

3 Answers 3

This depends on what cloning software you're using to an extent, but as a general rule:

Is there a single partition of 256GB or less on the HDD? You can clone it across. If the HDDs partition is larger or there are several partitions that total greater than 256GB, the clone is liable to either outright fail, prevent you from initiating the process, or it may have unexpected results.

You could use PartedMagic to resize the partition on the HDD to fit on the SSD successfully and then clone it across. This won't work, of course, if there is more than 256GB of data in the partition.

Is cloning truly necessary in this situation? Cloning will bring across any baggage your OS installation has accrued, and you are presented with an opportunity to clean the cruft here.

share|improve this answer
add comment

If there is more data on the 500 gig than 256 gigs, then yes it does matter.

There are many pieces of software out there to clone drives, such as clonezilla, norton ghost, etc.

I prefer to use gparted and dd though.

Download and burn a gparted iso to disc, start up the live OS, check what the names of the drives are such as sda, sdb, sdc, sdz, etc.

Then open the terminal type in sudo bash to gain access to root.

Then type in dd if=/dev/sda of=/dev/sdb bs=1M

Substitute sda for the drive your clone and sdb for the drive it goes to, if and of mean input and output, bs is the size of chunks of data that transfer, 1M being a decent speed with low chance of errors reoccurring causing dd to go longer.

For each 100 gigs of space you're looking at a hour or so.

share|improve this answer
    
don't forget, you mught want to use a tool thats aware of the differing disk sizers, or partition the drive before hand. And that if the new drive is AF (and some SSDs are), some manufacturers seriously suggest a reinstall. –  Journeyman Geek Jun 27 '13 at 15:35
add comment

You can but you would have to partition your 500GB drive to be under the 256GB limit of your SSD.

Refer to this question

share|improve this answer
add comment

Not the answer you're looking for? Browse other questions tagged or ask your own question.