Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

If I have a computer with windows 7 on it, that is in the user login screen,

how do I force a reboot?

Pressing the "Shut down" button won't help since it is set to go to stanby in that occasion (but then again the user login screen would reappear)

share|improve this question
1  
There should be a power options on the login screen. If shutting down your computer only places it in hibernation then you have power mangement configuration problems. –  Ramhound Jun 28 '13 at 20:48

4 Answers 4

up vote 3 down vote accepted

If you wish to force a reboot, and the option to cleanly power down or reboot is not available, and a tap of the power button sends the device to standby, then hitting the reset switch, holding in the power button for 5 seconds, or removing power is the only option. It's a poor practice for admins to remove the ability for a user to power down cleanly, because the end result is that users tend to do a hard reboot out of necessity, potentially causing data loss or other issues.

share|improve this answer

One way to do it is a hard reboot or a hard reset by holding down the power button for 5 to 6 seconds or unplug the cable or the battery.

share|improve this answer
    
This is a very bad way to do it... I highly recommend AGAINST that! –  Taegost Jun 28 '13 at 19:57
4  
@Taegost, can you please tell us a better way? –  Carl Abrahamsson Jun 28 '13 at 19:59
    
This can cause data loss. This is a horrible idea. –  Ramhound Jun 28 '13 at 20:52
    
@Ramhound, got any better solution? –  Carl Abrahamsson Jun 29 '13 at 13:36

Just click the dropdown arrow attached to the shutdown button, and choose restart.

share|improve this answer
    
Many domain attached computers will have this option disabled via group policy, but still a good option +1. –  Scott Chamberlain Jun 29 '13 at 7:03

Optionally, you could also pull the plug, this would force it to shutdown/startup mind you you may need to run startup repair after.

share|improve this answer
    
This is a very bad way to do it... I highly recommend AGAINST that! –  Taegost Jun 28 '13 at 19:57
1  
@Taegost, can you please tell us a better way? –  Tanner Jun 28 '13 at 20:02

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.