How can I tunnel all of my network traffic through SSH?

Question

Whenever I'm using the internet from an insecure location (such as public wifi) I like to use an ssh tunnel (ssh -D port host) to ensure my traffic can't be sniffed. Unfortunately, there seem to be many applications which do not provide a way to specify a proxy (Flash is one major example).

It feels like there should be some way to use a tunnel for all network traffic from my computer, but I'm complete ignorant of how to do this. Any help would be greatly appreciated.

Answer 1

man ssh gives an example of exactly this. An ssh based vpn:

SSH-BASED VIRTUAL PRIVATE NETWORKS
     ssh contains support for Virtual Private Network (VPN) tunnelling using
     the tun(4) network pseudo-device, allowing two networks to be joined
     securely.  The sshd_config(5) configuration option PermitTunnel controls
     whether the server supports this, and at what level (layer 2 or 3 traf-
     fic).

     The following example would connect client network 10.0.50.0/24 with
     remote network 10.0.99.0/24, provided that the SSH server running on the
     gateway to the remote network, at 192.168.1.15, allows it:

       # ssh -f -w 0:1 192.168.1.15 true
       # ifconfig tun0 10.0.50.1 10.0.99.1 netmask 255.255.255.252

~~ snip ~~

     Since a SSH-based setup entails a fair amount of overhead, it may be more
     suited to temporary setups, such as for wireless VPNs.  More permanent
     VPNs are better provided by tools such as ipsecctl(8) and isakmpd(8).

Once you have that new interface up, you'd just have to make it the default route, which is a different question.

Answer 2

You should take a look at sshuttle.

Answer 3

Look for the "Tunnel" option in ssh. This creates a tunnel device that you can assign an IP address to, and then you change the default route to use that tunnel.

Answer 4

I've developed software that allows you to forward all TCP and optionally UDP through a SOCKS5 proxy, system-wide.

http://code.google.com/p/badvpn/wiki/tun2socks

It can even be installed on a router to forward all connections from computers on the LAN.

Answer 5

Just wanted to clear up that (ssh -D port host) is not a 100% secure way for traffic not to be sniffed. Adding (ssh -D -c blowfish port host) would be a better choice because you are atleast adding encryption to your session. There are more options you could add but it is easy enough to just type "man ssh" in your terminal or Google for a complete listing.

The option I think that you are looking for is setting up a VPN (Virtual Private Network)

Have a look at this article to get an understanding of the diffrence between the two (SSH vs. VPN) or a good summarized version, before you tackle setting up your own VPN. If you do decide to go the VPN route I recommend OpenVPN, its free and lots of documentation and support.

Answer 6

SSH-BASED VIRTUAL PRIVATE NETWORKS ssh contains support for Virtual Private Network (VPN) tunnelling using the tun(4) network pseudo-device, allowing two networks to be joined securely. The sshd_config(5) configuration option PermitTunnel controls whether the server supports this, and at what level (layer 2 or 3 traf‐ fic).

 The following example would connect client network 10.0.50.0/24 with
 remote network 10.0.99.0/24 using a point-to-point connection from
 10.1.1.1 to 10.1.1.2, provided that the SSH server running on the gateway
 to the remote network, at 192.168.1.15, allows it.

 On the client:

       # ssh -f -w 0:1 192.168.1.15 true
       # ifconfig tun0 10.1.1.1 10.1.1.2 netmask 255.255.255.252
       # route add 10.0.99.0/24 10.1.1.2

 On the server:

       # ifconfig tun1 10.1.1.2 10.1.1.1 netmask 255.255.255.252
       # route add 10.0.50.0/24 10.1.1.1

 Client access may be more finely tuned via the /root/.ssh/authorized_keys
 file (see below) and the PermitRootLogin server option.  The following
 entry would permit connections on tun(4) device 1 from user “jane” and on
 tun device 2 from user “john”, if PermitRootLogin is set to
 “forced-commands-only”:

   tunnel="1",command="sh /etc/netstart tun1" ssh-rsa ... jane
   tunnel="2",command="sh /etc/netstart tun2" ssh-rsa ... john

 Since an SSH-based setup entails a fair amount of overhead, it may be
 more suited to temporary setups, such as for wireless VPNs.  More perma‐
 nent VPNs are better provided by tools such as ipsecctl(8) and
 isakmpd(8).

Answer 7

Use these examples:

• Forward port 80 from a remote host to 8888 on your localhost

  ssh -fnN -L8888:localhost:80 user@server

  Use this to access services on a remote host that are only available there

• Forward port 80 from yourlocalhost to 8888 on a remote host

  ssh -fnN -R8888:localhost:80 user@server

  Use this to allow ther users to access your services: webserver, or whatever.

Cheers! :)