Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

For some reason I can't activate a dynamic disk connected to my PC via a USB hard disk enclosure. It has activated previously without any problems.

When I check the event logs, I get this message every time I try to activate the disk:

dmio: Harddisk2 write error at block 2930277167: status 0xc0000015
share|improve this question

3 Answers 3

I ran the manufacturers to test for errors, but it found none. I still can't access the disk, but I was able to use this tool to recover all of my data. I suspect the problem was caused by a dirty shutdown in Windows.


I just ended up reformatting the drive in the end

share|improve this answer

I'd run SpinRite on it to clear up any errors or bad sectors. I've saved several disks by using it, although I never use bad disks in a production environment after they've started giving errors.

share|improve this answer
    
Whilst this may theoretically answer the question, it would be preferable to include the essential parts of the product here, and provide the link for reference. –  KronoS Jul 13 '12 at 14:14

The reason appears here:

Dynamic disks are not supported for USB devices. The help and MSDN say this. You can fake around it in WinXP by attaching a drive to a SATA or IDE port, changing it to dynamic, then putting the drive in a USB enclosure. It appears they decided to enforce this restriction in Win7.

That's a drag, as it will make it difficult to mount a drive from a different machine on a USB chain, which you sometimes need to do to make repairs.

Microsoft is now enforcing the no-USB policy for Dynamic Disks.

If it is a single disk dynamic disk (not spanned or striped to another disk or set of disks), you MAY be able to convert it to a Basic Disk.

To change a dynamic disk back to a basic disk:

  1. Back up all the data on all the volumes on the disk you want to convert to a basic disk.
  2. Log on as Administrator or as a member of the Administrators group.
  3. Click Start, and then click Control Panel.
  4. Click Performance and Maintenance, click Administrative Tools, and then double-click Computer Management.
  5. In the left pane, click Disk Management.
  6. Right-click a volume on the dynamic disk that you want to change to a basic disk, and then click Delete Volume.
  7. Click Yes when you are prompted to delete the volume.
  8. Repeat steps 4 and 5 for each volume on the dynamic disk.
  9. After you have deleted all the volumes on the dynamic disk, right-click the dynamic disk that you want to change to a basic disk, and then click Convert to Basic Disk.

NOTE: You must right-click the gray area that contains the disk title on the left side of the Details pane. For example, right-click Disk 1.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.