Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have a Windows Server 2003 server that has a whole bunch of filenames that need renaming. Basically, I just need all - (hyphens) replaced with _ (underscores), no matter where they are in the filename. Assume that there are no duplicates.

I can do this on my Mac with a little script but the files are too large and crazy to transfer to my Mac, rename, then go back to the server. Is it possible to do this in a Windows command prompt without having to download a renamer or any additional software?

share|improve this question
2  
You could simply rename them from your other computer over SMB. No need to copy files just for a name change. –  Јοеу Nov 5 '09 at 7:23
add comment

5 Answers

up vote 8 down vote accepted

From the command prompt - assuming that all of your files are in the same directory:

ONE-LINER

for /f "tokens=* delims= " %i in ('dir /b "*.txt"') do Set LIST=%i& set LIST | ren "%~fi" "%LIST:-=_%"

Keep in mind that this is a one shot per command prompt window. That means if you cancel this for any reason, then you'll need to open another command prompt and run again.

share|improve this answer
1  
I was trying to figure out a for /f method for it and my brain leaked out through my ears well before I got to the solution. Cracking bit of code, well done! –  AdamV Nov 5 '09 at 3:14
    
Thanks Adam. This actually took me about a week to figure out how to do. The only reason I did it was because of Command Line Kung Fu! (blog.commandlinekungfu.com/2009/05/…) –  Murdoch Ripper Nov 5 '09 at 3:55
    
Nice!!! I have a one-liner on my mac that I used, was hoping for one in Windows. NICE JOB! –  Matt Rogish Nov 5 '09 at 14:07
    
I edited it for a little correction (I had problems with spaces inside the filenames) –  Daniel Mošmondor Mar 13 '12 at 21:09
    
does this work for folders as well? –  Sun W Kim Jul 18 '13 at 18:42
show 1 more comment

Found it on stackoverflow:

http://stackoverflow.com/questions/261515/batch-file-script-to-remove-special-characters-from-filenames-windows

Set fso = CreateObject("Scripting.FileSystemObject")
Set re  = New RegExp

re.Pattern = "[-]" ' put all characters that you want to strip inside the brackets'
re.IgnoreCase = True
re.Global = True

If WScript.Arguments.Unnamed.Count = 1 Then
  If fso.FolderExists(WScript.Arguments.Unnamed(0)) Then
    Recurse fso.GetFolder(WScript.Arguments.Unnamed(0))
  Else
    WScript.Echo "Folder not found."
  End If
Else
  WScript.Echo "Please give folder name as argument 1."
End If


Sub Recurse(f)
  For Each sf In f.SubFolders
    Recurse sf
     WScript.Echo sf.Name, " -> ", re.Replace(sf.Name, "_")
    sf.Name = re.Replace(sf.Name, "_")
  Next
  For Each sf In f.Files
     WScript.Echo sf.Name, " -> ", re.Replace(sf.Name, "_")

     If sf.Name <> re.Replace(sf.Name, "_" ) Then
       sf.Name = re.Replace(sf.Name, "_")
     End If
  Next
End Sub
share|improve this answer
1  
this seems to be removing, rather than replacing, although I am sure it could be amended reasonably easily –  AdamV Nov 5 '09 at 2:43
    
the post you link to includes instructions for running the script, it would be helpful if you included that info in your answer. –  quack quixote Nov 5 '09 at 3:21
add comment

Another solution would be to use two batch files.

File 1: run_rn.bat:

forfiles /m "*.log" /c " cmd /c rn @file"

File 2: rn.bat:

set LIST1=%1
set LIST2=%LIST1:_=;%
ren %LIST1% %LIST2%

The batch files have to be in the same directory like the files you want to change.

share|improve this answer
add comment

12noon has a FREE utility to do mass file renaming with full regular expression support, which is pretty cool. Rename Reg Ex info page with links to download

I haven't used this one in anger, but have used other apps of theirs (especially display changer) and been really happy.

share|improve this answer
add comment

Batch File to replace one character in a filename with another character

Consider using a free GUI app to hold your hand: http://www.bulkrenameutility.co.uk/Main_Intro.php

If you must this yourself with a batch file, be super careful! Batch scripts don't have an "undo" button. If you execute your bat script which applies to all files recursively under somewhere like C:, you've just renamed every file on your computer and it will immediately stop working and fail to boot. You'll have to do an full OS reinstall. Always have a backup!

First you'll have to decide do you want the batch file to work on a single file? To work on all files in a directory? Or do have it done recursively (all files/folders under a directory). Here are some pointers:

Batch file to replace all underscores _ with the letter M to all files in current directory

Put this in a batch file named change_underscores_in_this_directory.bat

@echo off
setlocal enabledelayedexpansion
for %%a in (*_*) do (
  set file=%%a
  ren "!file!" "!file:_=M!"
)

Execute it, and all the files in that directory with an underscore will be changed to an 'M'.

Use a Batch File to replace spaces with nothing (removing the spaces):

http://stackoverflow.com/questions/11270453/how-to-remove-spaces-from-file-names-in-bulk

Use a Batch File to replace spaces with underscores, Recursively:

http://stackoverflow.com/questions/1613644/how-to-replace-names-recursively-via-windows-batch-operation

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.