I have a TV with built-in Wi-Fi adapter (Samsung Smart TV series 6). How can I use it a regular monitor using Wi-Fi instead of HDMI?
Currently I can use allShare software to cast videos to it. I am looking for a software solution.
I have a TV with built-in Wi-Fi adapter (Samsung Smart TV series 6). How can I use it a regular monitor using Wi-Fi instead of HDMI?
Currently I can use allShare software to cast videos to it. I am looking for a software solution.
After two years, I have just succeeded to do that in Windows 10. Assuming you have all required hardware:
:)
Your laptop or mobile device should support Intel's WiDi (Wireless Display) and have a WiDi receiver, or you can purchase a WiDi adapter separately. It will be something like this (NETGEAR Push2TV HD-TV Adapter for Intel Wireless Display PTV2000-100NAS HDMI Interface) but I am not recommending any particular such device.
Since I see that Samsung made a deal in June 2013 to start including WiDi in their TVs, it's unlikely that your current Samsung TV has this capability.
Intel's information on WiDi is here, and you can look up adapters from that page or from on-line electronics companies; there are several manufacturers.
The type of Wi-fi built into your TV is for networking, i.e. access to media from other devices. That is not the same as sending display content to use it as a monitor. It's like asking how to open a can by using an egg-beater - the Wifi you have, despite having the word "wireless" in it, is not the same as WiDi which is used for displays.
I hope that some salesperson didn't tell you that this would work, because without WiDi, all you can do is display media on the TV from other connected devices, but not use it as a second monitor.
Your question is similar to the one posted here.
This will also depend on the computer having WiDi capability; you haven't specified that, and only some have it (my Sony VAIO laptop has it included, but is advertised as such).
Google for "Samsung Screen Mirroring".
On Samsung TV: "Source - Screen Mirroring"
In Windows 8: right swipe - "devices - project" - you'll see your tv there
Not sure there's a solution for a Mac.
Devices - project works fine. You might have to switch the TV in Screen mirroring mode prior to project. Also, you'll probably need to remove and add the TV device
BTW, Windows 10 names it "Connect to the wireless display"