Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I have a Motorola / Sol Republic Tracks Air bluetooth headset. It works fine with both of my phones, and now I'm trying to use it to listen to the audio on my Windows 7 laptop. I have a cheap, unbranded bluetooth receiver bought off Deal Extreme. I know it works, because my girlfriend uses it to send pictures from her phone to her computer.

I coonected the bluetooth receiver on my lapptop and after automatically downloading the drivers off Windows Update, it is detected as "Generic Bluetooth Radio - Cambridge Silicon Radio Ltd." (see image below):

enter image description here

Then I proceed to pair the headset to the computer: as soon as I turn on the headset it enters pairing mode, announced by a series of beeps. If it was my phone I'd just turn on the bluetooth feature, wait for the scan to find the headset, press on its icon and the pairing would be finished. On Windows 7, I right-click on the bluetooth icon on the system tray, select "add a device", click the device name and press "next". It then presents me a dialog asking if I want to set a pairing code to type on the device keyboard, or type on the computer the device pairing code ("look for it on the user manual"), or pair without a code (see images below):

enter image description here

The device (obviously) has no keyboard, and although I have RTFM there is no mention of a pairing code on the user manual, so I choose the latter option. Then almost simultaneously three things happen: (1) a notification that the device has been added to the computer, (2) a driver install dialog showing Windows retrieving the drivers from Windows Update -- the three items installed are "Tracks Air (Mono Audio)", "Tracks Air (Stereo Audio)" and "Tracks Air (Remote Control)" -- and (3) a bubble notification stating "a bluetooth device is trying to connect".

enter image description here

If I click on the bubble notification, I am shown a dialog window asking for the pairing code (see image below). The problem here is, as far as I know of, there's no pairing code!

enter image description here

The headset seems to be recognized by Windows: it shows on the "printers and devices list" on control panel. Below are the "hardware" and "bluetooth" tabs of the device properties. On this last tab it says "device currently connected" even if I turn the headset off. There's also a "services" tab indicating "audio collector", "remote control" and "hands free telephony" (and with "headset" unchecked. I if check it and click "apply", it shows a driver installation dialog, and fails for "Tracks Air (Mono Audio)", but I suppose it is not relevant because I want audio output on the headset only).

enter image description here

Meanwhile, the headset keeps beeping to indicate it's still on pairing mode, and the "a bluetooth device is trying to connect" bubble keeps appearing periodically on the system tray.

The playback devices tab shows the headset as a possible audio output (see image below), but the option to use it as default is greyed out. There is a "connect" option, but upon clicking it, the system tray bubble shows up again.

enter image description here

share|improve this question
OBS: not a duplicate of How do I play audio through a Bluetooth headset in Windows 7? because the devices do show on the audio oupout devices list. – That Brazilian Guy Dec 29 '13 at 16:55
Did you try 0000 as pairing code? If that doesn't work you might want to mention the make and model of the headset. Maybe others have the same device. – Rik Dec 29 '13 at 17:06
@Rik, you posted your comment literally a few seconds after I had found it out! Thanks anyway – That Brazilian Guy Dec 29 '13 at 17:09
@ThatBrazilianGuy Please mention the model of your headset: it would make your question more valuable for those who have the same device and the same issue. – Alexey Ivanov Dec 30 '13 at 6:32
@AlexeyIvanov I have expanded and improved the question a tiny little bit, to help further visitors. – That Brazilian Guy Dec 30 '13 at 14:49
up vote 5 down vote accepted

I tried pairing the device on Ubuntu 12.04. Upon clicking on "Add a new device" it shows the following screen; the "PIN Options" button shows a dialog box that allow me to either select some sort of PIN auto configuration or insert a PIN manually.

enter image description here

The same dialog box states that many devices have their default PINs set as 1111, 1234 or 0000; the latter more common for devices such as microphones, mice and GPS.

I have entered 0000 on my device and it paired.

share|improve this answer
1234 is also common – Jan Doggen Dec 30 '13 at 14:53

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.