Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

The install disk boots, loads some files, then I get a BSOD.

Any advice?

Edit

Model is 123-YW-E175-A1 w/ Q6700 cpu

share|improve this question
1  
You need post the information from the BSOD. Not all BSODs are equal. –  Matthew Ruston Jul 17 '09 at 13:04
    
Does the motherboard have any form of RAID? –  Daniel A. White Jul 17 '09 at 13:10
    
Is the BIOS set to x64? –  Daniel A. White Jul 17 '09 at 13:11
1  
Is this a custom or off-the-shelf machine? If off the shelf, what is the make and model. If it is custom, please list the mainboard, discs, and ram makes and models –  Rob Allen Jul 17 '09 at 13:50
    
@Daniel For loading a x64 OS the motherboard and CPU just needs to support x64. For 64Bit Virtualisation you need to set the x64 Intel flags on. –  Diago Jul 17 '09 at 13:53
add comment

3 Answers

up vote 0 down vote accepted

Make sure you are using media with service pack 1 or better. Ideally sp2...

share|improve this answer
    
+1 Nice one Jeff. Didn't think of that. The instructions for slipstreaming SP1 also works for 2 and can be found here: pronetworks.org/forums/… –  Diago Jul 17 '09 at 13:50
add comment

I would also suggest trying to boot with the x86 CD and see if that works. Also providing the motherboard model number might help a lot.

It could be that you have a faulty Motherboard, or the motherboard needs a firmware update. The processor could also have an affect.

This is focussed at hardware causes of the problem

share|improve this answer
add comment

I encountered "STOP 0x0000007B INACCESSABLE_BOOT_DEVICE" installing Vista for the first time on a Dell notebook. The reasons came down to:

If you toggle your hard drives into IDE mode in the BIOS you can get through the install, update drivers and media and then follow instructions in this Microsoft KB article to toggle back to AHCI mode.

Alternatively, you can load the Matrix driver onto a USB key and supply it when the Windows install requests new drivers (watch for a "press spacebar prompt during the pre-install/blue screen with white text phase).

Hope this helps.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.