Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

As you guys may know, for several years now, Apple uses 4-ring headphone jacks instead of 3-ring headphone jacks, and the fourth ring is dedicated to microphone input. This is what lets you have headphones that also serve as a microphone on the iPhone (and probably most competing phones nowadays, too).

Image of a 4-ring jack.

Also for several years now, these jacks have been recognized by MacBook Pros so that you can connect this kind of headset on your computer and use its microphone.

However, even though my MacBook Pro on Mac OS X recognizes the microphone built into my headset (that has one of those 4-ring jacks), it seems that Windows 8.1 on Boot Camp doesn't register my headset as a microphone and instead insists on using only the built-in microphone. This is an issue when I'm playing games because the fan kicks in and annoys everyone voice chatting with me.

Is there a way to make Windows aware of the microphone integrated to my headset and using the fourth ring of the jack?

The device manager says that the headset is advertised by the 'Cirrus Logic CS4206A (AB 11)' audio controller.

share|improve this question
2  
It's all in the jack. Non-Apple PC's don't have the jack. See the adapter below. –  Fiasco Labs Jan 12 at 19:46
    
It's an issue with drivers, not Windows. It doesn't matter how the microphone is connected, it's the driver that should receive data from it and make it available for Windows. –  gronostaj Jan 12 at 19:50
    
@FiascoLabs, I'm using Windows on my MacBook Pro, which supports it. –  zneak Jan 12 at 19:52
    
@gronostaj, I'm not blaming Microsoft. If the solution involves third-party software to "fix" the driver, I'm fine with that too. –  zneak Jan 12 at 19:55
2  
@AthomSfere, I have that extra support. This headset absolutely works on Mac OS X on the same hardware. This is a driver issue. –  zneak Jan 12 at 20:13

2 Answers 2

Find the latest RealTek Sound subsystem drivers (check in your device manager on your Win install) on their website for the version of Windows you are running if available. Install them and see if it will pick up the extra ring. It's a 50/50 shot.

It's all still about the jack, Windows drivers never saw fit to support an Apple peripheral just to run under BootCamp.

Most threads on this, and from personal experience says to go get a USB or better yet Bluetooth headset and be done with cords altogether.

Other recommendation is to use Parallels and it virtualizes the microphone which can then be used by the Parallels drivers installed into Windows

share|improve this answer
    
Does mac use Realtek though? –  GeekyDewd Jan 12 at 21:10
    
You will have to check what the BootCamp driver install loads, but that is what was mentioned over on the Apple forums. You're replacing the BootCamp emulation with the real thing. That's why the comment to check in your Windows device manager. –  Fiasco Labs Jan 12 at 21:16
    
Bluetooth audio doesn't work via Boot Camp either. So I guess USB is the only option. –  Geeks On Hugs Mar 4 at 4:09

Only if you use something like this StarTech 3.5mm 4 Position Headset Splitter Adapter - Female to Male

Windows would need a mic plugged into the mic jack, unless the hardware you're using can tell windows that the input jack you're using is for speakers/headset and microphone.

Go to the task bar, and near the clock right click the speaker and click recording devices. Do you see your mic there?

share|improve this answer
    
The hardware could do it, since it's doing exactly that on Mac OS X. No, the headset microphone doesn't show up. –  zneak Jan 12 at 19:57
    
I know the hardware can do it, but windows needs a driver to tell windows what to do with it. I'm sorry for my error windows would need software to tell the computer how to work the hardware. I know the hardware is capable but windows doesn't know that yet. And the adapter is a cheap solution. –  GeekyDewd Jan 12 at 20:02
    
Make sure that you have all the driver updates using Windows Apple Software Update, or manually download them from support.apple.com/downloads. Edit: I think Version 3.1 is the newest update, but I am not a Mac user so I may be mistaken. –  GeekyDewd Jan 12 at 20:04
    
realitypod.com/2010/07/… –  GeekyDewd Jan 12 at 20:06
    
I can't use the adapter because MacBook Pros have a line in, not a microphone in. Pretty sure my drivers are up-to-date, which is why I'm trying to see if there's another solution. –  zneak Jan 12 at 20:09

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.