Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Is there a way to completely remove Mac OS X from MacBook Pro and replace it with Windows 7? I’m not talking about Boot Camp, I’m talking about completely wiping disk of any files and partitioning it for Windows installation. Any BIOS, booting, compatibility problems? I know it’s rare to replace Mac OS X for Windows, but I have this one situation where this is needed so I would appreciate any help. Thanks!

share|improve this question
One problem with installing ONLY XP.. you can't apply future firmware updates. If you don't want to use Mac OS, I suggest a BARE minimum install of Mac OS first. Then Boot Camp to partition leaving as little as 10GBs for Mac OS, and the rest for Windows. Trust me.. YOU WIIL want the ability to apply firmware updates when they are released. (I speak from experience.) – CornDoggyRob Nov 21 '10 at 16:04
Before doing anything with the partitions that Boot Camp builds, read this:… – Mark McKenna Mar 24 '15 at 3:57
up vote 10 down vote accepted

If you do a clean install and format your disk with a MBR, it should be possible to install without either OS X or Bootcamp. Also note, that you will need the windows drivers from the OS X discs.

I haven’t tried it, so I can’t assure that it works, but see for ex. [1] and [2], resp.

share|improve this answer
I Googled a bit and found out that Windows 7 natively supports EFI so I think this solution should work, of course with OSX DVD drivers. But probably new BootCamp will bring newer drivers for Windows 7. – user18948 Nov 22 '09 at 21:00
This is correct. Vista didn't support EFI natively, but Win7 does. – Andrew Scagnelli Jan 1 '10 at 22:25

Yes, its possible.

Insert Mac OS X Install Disc (this part should work with OS X 10.4 Tiger or OS X 10.5 Leopard discs).

Reboot. Hold down C key during reboot Do not start the install. From the Utilities menu, select Disk Utility.

Select your hard drive from the list and then click the Partition tab / button.

Click the Options button and select “Master Boot Record” as the partition scheme. Click OK.

From the Volume Scheme drop down list, select 1 Partition. Select MS-DOS (FAT) for the format (not that this matters since you will reformat it using NTFS during the Vista install).

Click Apply.

Reboot. Hold down the Alt/Option key turning reboot.

When the graphical boot menu appears, hit the eject button. Take out the OS X Install Disc and put in your Vista with SP1 install disc.

Proceed through the Vista install.

When you come to screen titled “Where do you want to install Windows,” select Disk 0.

There will be a message saying that you cannot install to that disk because it is not formatted using NTFS.

Click the Drive Options link. Click the Format link. Click OK in the confirmation dialog.

Now select Disk 0 and click Next.

The Vista installation should proceed as normal.

Once Windows is installed and loaded, insert an OS X 10.5 Leopard disc and install the Windows drivers from Apple.

Thanks to "Derek Hatchard's Information Flume Ride"

share|improve this answer
+1 for a good how-to! – dag729 Apr 26 '10 at 20:15

No, Macs don't use BIOS they use EFI. Because of that, you need to use OSX + Bootcamp to run Windows.

share|improve this answer
See my comment to Debilski – user18948 Nov 22 '09 at 21:01
I wasn't aware that 7 supported EFI - in that case, this only applies to older versions of Windows. – Rich Bradshaw Jan 7 '10 at 12:40

You must log in to answer this question.

protected by Ivo Flipse Nov 22 '10 at 21:40

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).

Would you like to answer one of these unanswered questions instead?