Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

XP's sndvol32 sound mixer used to feature individual volume controls such as Wave, SW Synth and CD Player, PC Speaker or PCM SPDIF among others. These could be set hidden or visible under it's menu Options / properties / (device) / playback .

sndvol32 options properties playback volume controls cd player sw synth

With Windows 7's sndvol now it looks like this, with no menu, no options, no properties, no such volume controls:

sndvol windows 7 volume controls

edit 1( I tried to check under control panel / sound, there is a tab for 'playback' and one for 'recording', among others, which seem to happen to named like XP's options/properties checkboxes. But the other volume controls are missing, with only Speaker and Headphones available in the playback list, either which didn't seem to correspond to the "Wave" control anyway. )edit 1

I cannot find a way to add the missing controls. and enabled hidden devices, but couldn't find these controls. Maybe I've just missed something. Most of them did not used to be any special, they were handled by the general drivers/OS.

Where did those previous controls go and how can I set them?

share|improve this question
4  
They changed it. Each application can be turned now. –  Ramhound Apr 20 at 22:20
    
Click on the speaker icon and you'll get all/most of your sound card driver's options. I can mute my Input Monitor from in there, under a "levels" tab, for example. –  Ƭᴇcʜιᴇ007 Apr 20 at 23:29
    
@Ramhound yes I can understand that however I cannot see that any application should correspond to "midi synthetizer" or "CD Player" and definitely not "PC speaker", if you got what I mean. For example, cd player is either an analog or a digital data transmit from the physical CD drive to the motherboard or the OS. The analog one uses a cable. Definitely no application owns it exclusively. The midi synthetizer can be a software or a chip on your sound card, among others; no application should exclusively own that either. –  naxa Apr 21 at 10:03
    
@techie007 well that only gives a single slider for me, my Speakers. But you point to this idea, I right clicked the tray icon and got "playback devices". However if this supposed to be the equivalent of options/properties/playback, then I cannot see where particular devices did go. I have no synthetizer, no cd audio, only speakers and headphones. This doesn't seem to correspond with the XP way since there it wouldn't be any different if you attached speakers or headphones, however you got a separate control for synth, etc. I tried to right click or find a button to add devices, without luck. –  naxa Apr 21 at 10:08
1  
@naxa - If you have an audio disk in the "CD Player" then software is playing the music and would be listed which means you can tune the levels for that given application. –  Ramhound Apr 21 at 10:45

2 Answers 2

In your Windows 7 screenshot, there is a downwards arrow next to 'Speakers'. Click on that and there should be options for different output devices or input devices. I am not sure if this is what you specifically want, but this should show every input/output it is using.

share|improve this answer

Right click on the speaker button in the taskbar (the one you painted big red arrow for). Select Recording devices. Enable hidden, select one and click the Properties button.

Also reachable as Control Panel->Sound->Recording tab.

Now, in recording device properties, go to Listen tab. This is different from WindowsXP. Check "Listen to device" and Apply.

share|improve this answer
    
I think now I understand, maybe this could be combined with EdG's answer. Why this had to be changed, the new way is so much more complicated. –  naxa Dec 4 at 1:38

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.