0

I'm trying to stream an IP webcam ASF live stream to a ffserver to output an OGG format. The server starts successfully but the ffserver commands used to feed the ffserver fails with a segment fault.

Input stream

$ ffprobe http://account:password@webcam/videostream.asf

Input #0, asf, from 'http://account:password@webcam/videostream.asf':
  Duration: N/A, start: 0.000000, bitrate: 32 kb/s
    Stream #0:0: Video: mjpeg (MJPG / 0x47504A4D), yuvj422p(pc), 640x480, 25 tbr, 1k tbn, 1k tbc
    Stream #0:1: Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 8000 Hz, 1 channels, s16p, 32 kb/s

ffserver configuration

my ffserver configuration is :

Port 8091
RTSPPort 554
BindAddress 192.168.1.62
MaxHTTPConnections 1000
MaxClients 100
MaxBandwidth 1000
CustomLog -

<Feed webcam.ffm>
        File /tmp/webcam.ffm
        FileMaxSize 500M
        ACL allow localhost
        ACL allow 192.168.0.0 192.168.255.255

</Feed>

<Stream webcam.ogg>
        Feed                    webcam.ffm
        InputFormat             asf

        Format                  ogg
        Preroll                 15

        VideoCodec              libtheora
        VideoFrameRate          7
        VideoSize               640x480
        PixelFormat             yuv420p
        Qscale                  7
        VideoBitRate            256
        VideoBufferSize         40

        AudioCodec              libvorbis
        AudioBitRate            64
        StartSendOnKey
</Stream>


<Stream status.html>
        Format status
        # Only allow local people to get the status
        ACL allow localhost
        ACL allow 192.168.0.0 192.168.255.255
</Stream>

ffmpeg feed

I run the following command that fails

$ ffmpeg  -i http://account:password@webcam/videostream.asf http://ffserver_ip:port/webcam.ffm
Input #0, asf, from 'http://account:password@webcam/videostream.asf':
  Duration: N/A, start: 0.000000, bitrate: 32 kb/s
    Stream #0:0: Video: mjpeg (MJPG / 0x47504A4D), yuvj422p(pc), 640x480, 25 tbr, 1k tbn, 1k tbc
    Stream #0:1: Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 8000 Hz, mono, s16p, 32 kb/s
[swscaler @ 0x36a80c0] deprecated pixel format used, make sure you did set range correctly
Segmentation fault

Thanks for your help

2

1 Answer 1

0

this work for me without audio

<Feed cam1.ffm> File /tmp/cam1.ffm FileMaxSize 10000K ACL allow 127.0.0.1 </Feed>

<Stream vid.ogg> Feed cam1.ffm Format ogg VideoCodec libtheora VideoFrameRate 15 VideoSize vga VideoBitRate 320 VideoBufferSize 40 VideoGopSize 12 VideoQMin 1 VideoQMax 31 Preroll 0 AVOptionVideo flags +global_header NoAudio StartSendOnKey </Stream>

to reload my server

ffserver -f /etc/ffserver.conf reload

to start my feed

ffmpeg -f alsa -i default -f video4linux2 -i /dev/video0 http://localhost:8888/cam1.ffm

to play video streaming from html

<video controls>
    <source src="http://192.168.1.104:8888/vid.ogg" type="video/ogg">
     Your browser does not support the <code>video</code> element.  
</video>

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .