>C:\>netstat -r
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.125.75.1 10.125.75.2 281
10.125.0.0 255.255.0.0 On-link 10.125.75.2 26
10.125.75.2 255.255.255.255 On-link 10.125.75.2 281
10.125.255.255 255.255.255.255 On-link 10.125.75.2 281
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
192.168.0.0 255.255.0.0 On-link 192.168.0.2 26
192.168.0.0 255.255.255.0 On-link 192.168.0.2 281
192.168.0.2 255.255.255.255 On-link 192.168.0.2 281
192.168.0.255 255.255.255.255 On-link 192.168.0.2 281
192.168.255.255 255.255.255.255 On-link 192.168.0.2 281
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 10.125.75.2 281
224.0.0.0 240.0.0.0 On-link 192.168.0.2 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 10.125.75.2 281
255.255.255.255 255.255.255.255 On-link 192.168.0.2 281
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
0.0.0.0 0.0.0.0 10.125.75.1 Default
10.125.0.0 255.255.0.0 10.125.75.2 1
192.168.0.0 255.255.0.0 192.168.0.2 1
===========================================================================
Window vista PC
2 network cards in same workstation
NIC 1
IP 10.125.75.2
SNM 255.255.255.0
GW 10.125.75.1 routes traffic to ADSL router then to internet
NIC 2
IP 192.168.0.2
SNM 255.255.255.0
GW 00.00.00.00 so as not to get that multi gateway issue
Hello I am having problems routing TCP IP traffic
The only succesful pings are due to the network cards NIC 1 & NIC 2 residing in the same workstation. 10.125.75.2 pc can ping the network card 192.168.0.2 and vice versa.
Workstations on the 10.125.75.X network can only ping the 10.125.75.2 network card but cannot ping the 192.168.0.2 network card
And again Workstations on the 192.168.0.X network can only ping the 192.168.0.2 network card but cannot ping the 10.125.75.2 network card
I have tried to add the following persistent routes but it is not working
route -p add 10.125.0.0 MASK 255.255.0.0 125.125.75.2
route -p add 192/168.0.0 MASK 255.255.0.0 192.168.0.2
But the routes added are not allowing pings to resolve the above issues.
My question(s) is /are:
What amendments do I need to make to routing table (delete entries, if any that are allowing traffic not to route )
What are the correct route commands I need to add in order for the networks to route traffic
Currently only 10.125.75.X workstations can access the internet,it is possible to add a route that will also allow trafic from the 192.168.0.2 to jump onto the 10.125.0.0 network then also allow traffic to go to the internet