I have a problem with a QuickCam Pro 9000 that's driving me nuts. Inside the Logitech Webcam Software when I set the resolution to 320x240 I get a blank image at first and eventually I'll get a frozen image with a mostly horizontal line going across. When I select 960x720 I get an image where there is a thin sliver of a horizontal frame repeated over and over at a very slow frame rate. When I set the resolution at 640x480 it works fine.
Here are my numbers:
=== Start of device information ======================= Device name: Logitech QuickCam Pro 9000 USB Vendor ID (VID): 0x046D USB Product ID (PID): 0x0990 USB Revision (BCD): 0x0005 Firmware Version: 2.90.9018 Firmware CRC: 0x7615 EEPROM Version: 2.109 Sensor Type: 2.6 Driver Version: 12.10.1110.0 === End of device information =========================
I'm running Windows XP Professional with SP3. The processor is an AMD Athlon 64 X2 4400+ with 1.75 GB RAM reported in System Properties. The video card is an ATI Radeon X1200 Series.
I've also asked this same question at Logitech's forums: http://forums.logitech.com/t5/Webcams/Quickcam-pro-9000-problems-at-320x240-and-960x720/m-p/409560 . I'll update this question (or post an answer, if appropriate) if I get feedback from there.
Thanks in advance for any help with this, it's been driving me crazy for a while now.