Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I used to be able to see and manage my iPod with different softwares: Amarok, Rhythmbox, GTKPod. The device is a nano 1st generation 4gb.

Currently it mounts regularly and can be accessed from the file system, but I get this in dmesg:

[ 1547.617891] scsi 11:0:0:0: Direct-Access     Apple    iPod             1.62 PQ: 0 ANSI: 0
[ 1547.619103] sd 11:0:0:0: Attached scsi generic sg2 type 0
[ 1547.620478] sd 11:0:0:0: [sdb] Adjusting the sector count from its reported value: 7999488
[ 1547.620494] sd 11:0:0:0: [sdb] 7999487 512-byte hardware sectors: (4.09 GB/3.81 GiB)
[ 1547.621718] sd 11:0:0:0: [sdb] Write Protect is off
[ 1547.621726] sd 11:0:0:0: [sdb] Mode Sense: 68 00 00 08
[ 1547.621732] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 1547.623591] sd 11:0:0:0: [sdb] Adjusting the sector count from its reported value: 7999488
[ 1547.624993] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 1547.625003]  sdb: sdb1 sdb2
[ 1547.629686] sd 11:0:0:0: [sdb] Attached SCSI removable disk
[ 1548.084026] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 1548.369502] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 1548.504358] FAT: invalid media value (0x2f)
[ 1548.504363] VFS: Can't find a valid FAT filesystem on dev sdb1.
[ 1548.945173] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 1548.945179] FAT: invalid media value (0x2f)
[ 1548.945182] VFS: Can't find a valid FAT filesystem on dev sdb1.
[ 1610.092886] usb 2-6: USB disconnect, address 9

The only application that can access it (partially) is Rhythmbox. I say partially because I can transfer files to the iPod but can't remove or modify them. Also one transfer didn't finish and only 9 out of 16 songs were delivered to the device. All other softwares I tried (GTKPod, Amarok, Songbird) don't even detect it.

What can I do to troubleshoot this?


# fdisk -l /dev/sdb

Disk /dev/sdb: 4095 MB, 4095737344 bytes
241 heads, 62 sectors/track, 535 cylinders
Units = cylinders of 14942 * 512 = 7650304 bytes
Disk identifier: 0x20202020

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1          11       80293+   0  Empty
Partition 1 has different physical/logical beginnings (non-Linux?):
    phys=(0, 1, 1) logical=(0, 1, 2)
Partition 1 has different physical/logical endings:
    phys=(9, 254, 63) logical=(10, 181, 8)
Partition 1 does not end on cylinder boundary.
/dev/sdb2              11         536     3919415+   b  W95 FAT32
Partition 2 has different physical/logical beginnings (non-Linux?):
    phys=(10, 0, 7) logical=(10, 181, 15)
Partition 2 has different physical/logical endings:
    phys=(497, 240, 62) logical=(535, 88, 61)


The "before" state is hard to tell, it was a lot of updates ago. Haven't been using my iPod for a while so I can't say when exactly it stopped working. I'm sure Amarok was still at version 1.X but can't remember when it was. My current system is debian testing fully updated.

NOTE: just noticed that if I mount the device manually instead of letting nautilus automount it, I can see it again on GTKPod but still not on Banshee AND it's vanished from Rhythmbox...

share|improve this question
I'm afraid I've got no advice but wanted to share my experience trying to use my ipod nano (3rd g i think?) with linux. If I remember right, it mounted automatically (ubuntu 9.10 btw), all songs played perfectly, and I was able to transfer files in both directions. When i disconnected the ipod though and tried to listen to files - my ipod was empty! even though both ubuntu and windows7 were able to see the music on it. apple wouldnt support linux and told me to restore the ipod. I did after backing up the files, and i haven't solved the problem since. – user10580 Dec 26 '09 at 20:34
You say you used to be able to manage your iPod with various software - what have you changed? Which are you running - stable/testing/unstable? Update your question with the "before" state. – camh Dec 30 '09 at 1:38

You could try Floola.

It's got some database repair functions, which have helped me out in the past.

share|improve this answer

The messages you're seeing there for /dev/sdb1 are entirely normal, since there isn't a FAT file system on it.

Can you post the output of fdisk -l when you plug it into your PC?

And if there is more dmesg output which mentions /dev/sdb2, post that too.

Edit: I've just noticed that you said in your original question that it actually mounts normally - in which case the output you're getting in dmesg is entirely irrelevant ;)

The next thing to do would be to run a fsck on the file system, since the problem you're describing could be attributed to a damaged filesystem too. To do that, you're going to want to plug the thing in, and manually unmount it:

umount /dev/sdb2

and then

fsck -av /dev/sdb2

Once that's completed, disconnect and then reconnect it, and then cross your fingers :)

share|improve this answer
Added output of fdisk -l /dev/sdb. Nothing else relevant in dmesg output. – Matteo Riva Dec 26 '09 at 20:24

Keeping things simple - if you don't have any files that are uniquely on the iPod (i.e. everything exists on another computer somewhere), connect it to a Windows or Mac computer and use iTunes to 'Restore Factory Settings'.

This button to do this is available from the iPod management page behind the music/movies or whatever else you have on your iPod.

For more info check:

share|improve this answer

I use VirtualBox on Linux to run iTunes to upload music to my phone. This method is slow; but it works. So if you have the MS Windows install media, install a virtual machine with Windows and iTunes.

VirtualBox (, Oracle

share|improve this answer

you could try and open it with Itunes on a windows computer, i found that sometimes the itunes DB gets messed up

share|improve this answer

Have you tried accessing the iPod normally using a Windows or Mac computer? It's a bit weird how two of the programmes will "partially" connect to it and the others won't. It may be a case that the iPod is on it's last legs and the memory inside the device is failing.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.