Got a new computer for Christmas and yanked the 2nd hard drive out of the old computer, to use as a data drive. Connected it to the new computer successfully with a USB/IDE bridge I had laying around. Went back and forth from the old to the new computer several times with no problems. Obviously I disconnected it from one of the computers the wrong way. Now neither of the computers recognizes the drive at all. Any trick or gimmick I can use to undo whatever damage I've done? Or am I doomed, and this hard drive is now trashed?
EDIT: Checked the pins like Wil suggested. One looked a little off so I straightened it out. No luck. Tried a different USB/IDE bridge. No luck. Drive is a Seagate Barracuda 7200 - 320GB Ultra ATA
EDIT #2: It's late, I'll try putting it back into the old computer tomorrow to see if that works. That's not too hard to do.
Edit #3: Put it back into the old computer & it didn't read it. Also used the USB/IDE bridge on a different bare drive and it read that with no problem. Any other suggestions?