I accidentally disabled my D-link router's web interface. I installed dd-wrt firmware on it. The router's SSH and telnet connections are disabled. I don't want to reset the router.
How can I enable the web interface?
I accidentally disabled my D-link router's web interface. I installed dd-wrt firmware on it. The router's SSH and telnet connections are disabled. I don't want to reset the router.
How can I enable the web interface?
I recommend following these steps in the future: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=29181
nvram set httpd_enable=1
nvram set http_enable=1
nvram commit
You can just reboot or start httpd from the command line:
httpd -p 80
I followed them and got mine to work.
SSH and then:
nvram set remote_management=1
nvram set http_wanport=8080
nvram set httpsd_enable=1
nvram set https_enable=1
nvram set remote_mgt_https=1
nvram commit
reboot
Then connect:
Ok..I got it.. I access it over https..and entered username and password.
Keep in mind,there are protocols (http and https) that router used to display its web-based interface.
thank you guys..
You can soft-reset the router - i.e., keep the "reset" button pressed for 30 seconds. This will bring back most of the router's settings to its defualt.