Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

How can I reboot my Linksys WAG54G2 router from the web management interface?

share|improve this question

5 Answers 5

up vote 1 down vote accepted

you're out of luck, no restart from the HTML interface of the WAG54G2.

power off/on is the only way.

... what were they thinking?

share|improve this answer
    
So is there any other way? like connecting though telnet or hyper terminal or something else!!? How did they forget to do this!!!! –  AMgdy Jan 7 '10 at 1:44
    
no, there is no other way. this model is not supported by any 3rd party firmware either, the only hope is a decent firmware upgrade by Linksys. –  Molly7244 Jan 7 '10 at 1:53

You can do the backup/restore trick:

  1. Go to the Backup & Restore page under Administration:

    Router screenshot

  2. Backup your configuration.

  3. Restore with the backup you just saved.

This makes your router restart but changes nothing in the configuration!

share|improve this answer

Open your web browser and enter this address:

http://your.router.ip/setup.cgi?todo=reboot

E.g. if your router IP is 192.168.1.1 then enter the following:

http://192.168.1.1/setup.cgi?todo=reboot
share|improve this answer
    
I've tried before and was not working!!! I think this hack is related to certain firmware version!! I have the latest and not working on it –  AMgdy Jun 14 '11 at 7:35
    
He did say "from the web interface." –  Isaac Rabinovitch Nov 19 '12 at 22:07

This syntax works for WAG54G2 V1.00.19:

http://your.router.ip/setup.cgi?next_file=reboot_guage.htm

e.g. if your router ip is 192.168.1.1 then:

http://192.168.1.1/setup.cgi?next_file=reboot_guage.htm

share|improve this answer
    
It's just showing the reboot progress screen but not actually reboot the device –  AMgdy May 9 '12 at 23:04
    
@Robert do you have the reboot URL's for other routers as well? I'm trying to put together a list to write software ppl can use to reboot remotely or without having to go downstairs to their routers, UPnP/HNAP etc are all hit and miss/useless... so if you have more reboot URL's for other versions or routers, we will finally be able to solve this problem once and for all! Would love your help. Contact me. –  user51047 Aug 6 '12 at 16:32

I use this web form for remote reboot: http://192.168.1.1/Reset.htm

share|improve this answer
    
Superficially this looks the same as the answer from 2011. What makes this one different? –  Jonathan Garber Dec 8 '13 at 23:39
    
@JonathanGarber, the URL. None of the other answers link to this specific page, which if correct for the router in question, would make it a good answer. –  Synetech Dec 8 '13 at 23:40
    
@Synetech: Indeed. Hence the "superficially" bit. You're right that I should have been more explicit. Alex, if you could edit the answer to explain how it's different and what it does, it would be a better answer than it is now. That's what we're all about here at Stack Exchange: The best possible answers to questions. –  Jonathan Garber Dec 8 '13 at 23:46
    
@JonathanGarber, it’s different because it’s a different URL. Obviously. What it does is to reset the router. Obviously. The only thing that Alex can add is whether they in fact are using the same router make and model as AMgdy. –  Synetech Dec 9 '13 at 0:41
    
@JonathanGarber –  Alex Jan 20 at 15:56

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.