Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I'd like to use SSD as ReadyBoost cache disk. However, ReadyBoost can work with pluggable USB drives only (AFAIK). Is there any way to avoid this limitation?

share|improve this question
2  
If you look at the Wikipedia article it states "If the system drive is a solid state disk (SSD), ReadyBoost is disabled since it would have little or no effect.". So the current answers have said you can use and SSD for ReadyBoost, but apparently not if it's the system drive. –  DMA57361 Aug 13 '10 at 14:49

4 Answers 4

up vote 5 down vote accepted

On Windows 7 you CAN use an internal SSD drive for ReadyBoost.

Example scenario where it makes "some" sense: You have an existing Windows 7 desktop that could use a performance boost, but you don't have time to reinstall/migrate the boot drive to an SSD.

  • Install a cheap SSD, and configure it for ReadyBoost (just right click on the drive the same as you would a USB Flash drive). NOTE: ReadyBoost will only use 4GB of the drive.

  • Move your virtual memory paging file from the boot drive to the SSD.

  • Move any data files you are working with actively to the SSD (such as source code if you are developer).

Total time invested: About 10 minutes Performance improvement: Noticeable/useful but not magic

share|improve this answer
3  
ReadyBoost can use more than 4Gb of a drive - the limit is only present on Vista and certain filesystems (NTFS & exFAT allow more). I've got a spare 16Gb SD Card that I leave plugged in my machine that's providing a 16Gb ReadyBoost cache... –  DMA57361 Aug 13 '10 at 14:42
1  
Note that doing this will put extreme wear on the SSD very quickly, which may decrease its lifetime significantly. –  nhinkle Jun 1 '11 at 17:18
5  
@skevar7: Uhm no, ReadyBoost is to aid systems with slow HDDs, not RAM. –  Tom Wijsman Sep 26 '11 at 13:27
1  
@skevar7 I believe your comment about being designed for low RAM systems is incorrect. See the MS article: technet.microsoft.com/en-us/magazine/ff356869.aspx –  Philip Dec 3 '13 at 16:53
1  
@nhinkle How would using the SSD as a disk cache result in more wear than using the SSD as the OS installation disk in the first place? I don't think that concern is valid if the other option is directly installing the OS on the SSD. –  Philip Dec 3 '13 at 16:53

use the SSD as system drive, not only will virtual memory be much faster (than anything ReadyBoost has to offer via the USB 2.0 bottleneck) but also the overall system performance.

P.S.: ReadyBoost is a relic from the days when RAM was still a precious commodity. today, memory is dirtcheap, i wouldn't bother with ReadyBoost.

share|improve this answer
3  
Big SSD is too expensive. And Win7-64 eats 20 gigs for empty installation only... –  skevar7 Jan 9 '10 at 16:13
1  
not true, use vLite and get a Windows 7 installation crammed onto a 4 GB SSD if necessary, no problem. –  Molly7244 Jan 9 '10 at 16:15
2  
Not exactly correct, it can't shrink 64bit Win7 to 4gb. But vLite is nice tool, thanks. Maybe I'd better go for SSD as system drive. But that damned ever-growing WinSXS folder makes me crazy :-/ –  skevar7 Jan 9 '10 at 18:08
2  
I need to improve disk system performance. Increasing RAM anymore won't do the trick. –  skevar7 Jan 13 '10 at 7:06
1  
Your PS about RAM is incorrect. From the first paragraph of the whitepaper: "This feature uses <...> as a hard disk cache to improve disk read performance" technet.microsoft.com/en-us/magazine/ff356869.aspx –  Philip Dec 3 '13 at 16:50

I managed to set up a full 120 GB SSD disk to use ReadyBoost by creating four partitions and enabling ReadyBoost on them all. ReadyBoost for Windows 7 allows only max 32 GB per partition but one disk can still be partitioned more times. Total maximum will be 256 GB with 8 partitions (32 GB each).

share|improve this answer
    
This is NOT how readyboost works. You have essentially wasted an etire 120 GB SSD. technet.microsoft.com/en-us/magazine/ff356869.aspx –  Keltari Jul 25 '13 at 1:35
    
@Keltari why do you say that? I agree it would probably be better to just install the OS on the 120GB SSD, but I don't think it's wasted. From the first paragraph of the article you linked: "This feature uses ... as a hard disk cache to improve disk read performance." So all 120GB should be in use as a cache to his slower HD. –  Philip Dec 3 '13 at 16:49

ReadyBoost essentially allows you to treat non-hard drive storage devices as memory.

If you want to do this on a regular internal hard drive, you should just allocate swap file space on that drive.

To do this:

  • Go to system properties (Winkey+Pause, or right click My Computer->Properties)
  • Advanced
  • Under "Performance" frame click Settings
  • Advanced
  • Change

You should see this dialogue:

Windows 7 Swap file settings

Here you can add a custom or system managed size page file for the drive letter of your SSD.

share|improve this answer
3  
That's not ReadyBoost, that's virtual memory. ReadyBoost caches files, virtual memory doesn't. –  OS2Waarp Jan 10 '10 at 0:18
    
Yes, but it's as close as you can get to readyboost for an internal drive though, afaik. –  RJFalconer Jan 10 '10 at 10:33

protected by Tom Wijsman Jan 30 '12 at 18:13

Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.