0

The fans are working.

There is no beep even in removing the RAM.

I tried everything that I found on the internet, but nothing worked for me.

Can anyone help me?

I have an Onboard video card. It's FOXCONN G31MX 2.0 Series motherboard.

Improve this question
1
  • How about the HDD read/write indicator on CPU ?
    – clhy
    Aug 16, 2015 at 15:53

1 Answer 1

Reset to default
0

Try disconnecting everything down to the basics. disconnect everything else just to eliminate any external hardware causing the issue.

If you don't see anything. Are there any beep codes being generated or is it silent with just the fan spinning up? If there's beep codes you should be able to diagnose the failing component. If no beep codes then it's pretty much PSU or Motherboard. PSU is easy to replace. The motherboard is obviously more of a pain.

Bulging capacitors is the kiss of death for most motherboards so definitely something to look for.

Second Which fan making the noise?? If it is PSU fan then I would bank on a PSU. If it is a CPU fan then you might have a bad CPU or Motherboard.

Improve this answer
3
  • OP has already mentioned there are no beeps
    – clhy
    Aug 16, 2015 at 17:33
  • Yup I know :) the beep not always work for some reason, by removing everything and replace it again sometimes the beep comes again
    – Narzan Q.
    Aug 16, 2015 at 17:41
  • I have removed and replaced every things. but no beeps and display. any way thank you. :)
    – su_bhagya
    Aug 19, 2015 at 4:37

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .