Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have a hard drive with 3 bad sectors. I know the sector numbers and the computer can still boot into Windows. I want to run sector repair from an HDD diagnostics tool from the manufacturer, but before I do that, I'd like to know what files are affected. Is there a way to figure out what file or files are occupying those sectors?

share|improve this question
1  
roadkil's sector editor might go part of the way, just doesn't list programs. –  barlop Jan 8 '13 at 16:04

6 Answers 6

Here's the process using WinHex, a handy hex editor that can examine and edit drives directly. Be very careful; this tool can damage your system if used inappropriately. Open disks read-only whenever possible.

  1. Since you have the bad sector locations already, you can open the drive in WinHex directly ("Open Disk" toolbar button) and then navigate to the sector to view the data ("Go to Sector" toolbar button). Assuming your sector locations are physical sector addresses, you need to open your physical drive in this step.

    This won't identify the file directly, but the left-hand pane should identify the partition that contains this sector and its corresponding relative sector address.

  2. If the partition you've identified is an NTFS or FAT partition, we can open the partition directly ("Open Disk" again). This will open the partition in a new tab, so you can switch back and forth as needed. In the partition tab, use the "Go to Sector" function again, but this time input the translated sector (the "relative sector" identified in the drive view).

    Now, in the left-hand pane, you should see a section on "Alloc. of visible drive space". Under this is the cluster #, physical sector #, logical (relative) sector #, and the filename if this sector actually belongs to a file.

If these steps don't give you an immediate answer, your bad sectors may not be in use. If the results are unclear, you may have to do some more digging to find your answer.

share|improve this answer
    
the downloadable version claims to be an evaluation version, but seems very capable. i'm not sure what the trial period is. see here for license options: x-ways.net/winhex/order.html –  quack quixote Jan 21 '10 at 7:49
    
WinHex was the bomb....Found what files where affected by the bad sectors (absolute sectors from surface scan) in minutes. Awesome tutorial. Thanks I would vote u up "quack quixote" but I don't have the 15 reputation necessary...... –  user102373 Oct 21 '11 at 6:03
    
Can the user interface be coerced into revealing this information without reading the sector? I am performing recovery on a disk that shuts down (detaches and powers off) when I read particular sectors. –  sheldonh Dec 16 at 19:29

Try nfi.exe - Windows NT File System (NTFS) File Sector Information Utility. Download from Microsoft OEM Support Tools Phase 3 SR2.

> nfi.exe
Dumps information about an NTFS volume, and optionally determines
which volume and file contains a particular sector.

Usage: nfi drive-letter [logical-sector-number]

        Drive-letter can be a single character or a character followed
        by a colon (i.e., C or C: are acceptable).

        Logical-sector-number is a decimal or 0x-prefixed hex
        number, specifying a sector number relative to the volume
        whose drive letter is given by drive-letter. If not
        specified, then information about every file on the volume
        is dumped.

   nfi NT-device-path physical-sector-number

        Determines which volume a given physical sector on a drive is
        within, and then which file on the volume it is in.

        NT-device-path is the NT-style path to a physical device.
        It must not include a partition specification.

        Physical-sector-number is a decimal or 0x-prefixed hex
        number, specifying a sector number relative to the physical
        drive whose device path is given by NT-device-path.

    nfi full-win32-path

        Dumps information about a particular file. full-win32-path
        must start with a drive letter and a colon.

Example: nfi \device\harddisk0\dr0 18397369

share|improve this answer

DiskView from Sysinternals performs exactly this function: to display a diskmap of the drive and let you see what files occupy what clusters.

Unfortunately, there does not seem to be a way of displaying the names of system files.

DiskView main window DiskView system file

share|improve this answer
    
    
That’s why I posted it as a separate answer, because it is a tool made specifically for this purpose, so it answers the question, but it is limited (I still use FAT32 extensively), so it is not the be-all-end-all solution. (Yet?) –  Synetech Dec 5 '13 at 6:09

Most defragmenting programs show a disk-map displaying all the clusters on the disk which you can then click (look for the ones marked as bad) to view the file(s) located in that cluster.

As Walter said, any disk and OS combo from the past decade or so will make sure to relocate files from bad sectors automatically (drive firmware usually handles this, but disk tools like chkdsk or defragmenters will usually do this as well).


Defraggler:

enter image description here

Defrag-a-File:

enter image description here

Vopt:

enter image description here

share|improve this answer
    
Looks promising, I'll give it a go. –  ChrisWue Jan 25 '12 at 21:13

as far as i know when a drive hits a certain number of read errors on a sector it gets marked as bad and its contents are copied away to another place on the drive. this usually happens before the data on that sector has become completely unreadable.

I try to dig up a source for that, just read it yesterday but cannot remember where.

from man hdparm (8)

Note also that the --repair-sector flag can be used to restore (any) bad sectors when they are no longer needed, including sectors that were genuinely bad (the drive will likely remap those to a fresh area on the media).

Bottom line: you don't have to care about bad sectors, the harddrives firmware does that for you. only thing you have to do is get a new drive before there are too many of them and your drive dies.

share|improve this answer
    
I'm pretty sure that reallocation happens on write and not on read. The SMART data of the drive seems confirms that. The number of pending sectors is high (larger than 0) while the Sector Reallocation Count is 0. For me that means: There are bad sectors marked for reallocation but they have not yet been reallocated. –  ChrisWue Jan 25 '12 at 20:54
    
have you tried CHKDSK? en.wikipedia.org/wiki/CHKDSK –  Baarn Jan 25 '12 at 21:01
    
look at the /r option –  Baarn Jan 25 '12 at 21:02
    
getting info out about the files stored in that sector seems to be not possible though. –  Baarn Jan 25 '12 at 21:05

RunTime's DiskExplorer allows you to examine a drive by sector. It's payware ($70 for the NTFS version) but free to try. They have versions for NTFS, FAT and Linux (ext2/3).

alt text

share|improve this answer
    
This looked promising, but sadly it doesn't work. DiskExplorer displays "Invalid MFT entry" for every sector of the drive. –  Jason81 Jan 20 '10 at 1:26
    
i expect there's a configuration step you're missing if it shows that for all sectors, but i haven't used this tool in a long time so i can't give you direct instructions with it. i'll add another answer with a separate tool; perhaps someone else will chime in with proper usage of this one. –  quack quixote Jan 21 '10 at 7:41
    
It’s not a configuration problem, it’s that Disk Explorer is just very complicated and hard to use. It is not automatic enough. (The old DOS program Norton Disk Doctor was similar, but much easier to use because it automatically read and adjusted to file-system structures. Shame it didn’t support NTFS and was discontinued.) –  Synetech Dec 5 '13 at 6:11

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.